User manual AEG-ELECTROLUX S2332-5I

[. . . ] Never let the mains lead touch the warming plate when it is hot! Never pull the plug from the socket by means of the mains cable! Do not use the appliance if: the mains lead is damaged, the housing shows visible signs of damage. The warming plate, coffee jar and filter cover become hot during operation due to the nature of their function. [. . . ] Ensure that the filter paper is lying against the wall of the filter holder. To ensure that no aroma is lost during coffee grinding and brewing, your coffee maker has an aroma lid. Please make sure it is always properly seated: on its underside, the aroma lid has a semicircular rib, which you should fit in the matching recess on the filter holder. The opening with the sealing lip then sits on the left. Close the cover of the fresh water container. Place the coffee jug with lid on the warming plate (Figure 5) Coffee grinder 4. Coffee beans in the bean container (Figure 6): The coffee grinder has a bean container (Figure 1/K). Fill the container completely and close securely with the lid. Grinding texture adjustment (Figure 7) Using the adjustment ring (Figure 1/J), the grinding texture can be adjusted to suit the amount of roasting of the beans. Position 1 = q is for light beans, position 4 = q for dark beans. We recommend to start with a medium setting, this is suitable for commonly available types of coffee. Preparation of coffee You have made the preparations in points 1 to 5 (see above). Then wipe out the grinder channel with a dry cloth and swivel the filter back through the resistance to the brewing position. Empty the paper filter, replace the cover and turn the screw back to the close" position. Check that the cover is correctly seated. Your coffee machine is now ready for use again. When dark, oily coffee beans are used, the grinder channel must be cleaned more frequently than if light beans are used. You can avoid grinder channel blokkages by: Not using frozen coffee beans, water condenses on these on defrosting, this can cause a blockage. Not swivelling the filter back to the grinding position immediately after brewing, steam rising from the coffee grounds can cause a blockage. Positioning the appliance sufficiently far away from the cooker or a deep fat fryer, fat can cause a blockage. Always keeping the container for the coffee beans closed. Every now and then clean the coffee grinder (Figure 1/K) of oily residues from the coffee beans, clean with a dry cloth. Cleaning of the filter holder (Figure 12/A and B) The filter holder can be removed for emptying and cleaning. [. . . ] Operate the anti-drip valve several times whilst rinsing. 2 To protect the environment Do not simply throw packaging material away. The cardboard box can be deposited in the old paper collection or the relevant refuse collection system. If available: Deposit the polyethylene (PE) plastic bag at a collection point for recycling. The foam polystyrene (PS) padding is free of CFCs. [. . . ]