User manual AEG-ELECTROLUX S2532EGLASSLI

[. . . ] This information has been provided in the interests of your safety. Please read it before installing or using the appliance. Please retain the instruction book for future reference. If owner ship is transferred, please leave the user manual for the new owner. [. . . ] The following effects are of significance in respect of the interior temperature: ambient temperature quantity and temperature of the food stored; frequency with which the door is opened and how long it is left open the location of the appliance. To permit storage of food packages of various sizes, the shelves can be placed at different heights. To remove the internal shelf pull forward until it can be tipped up or down and removed. please do the same in reverse to insert the shelf at a different height. For better use of space, the front halfshelves can lie over the rear ones. To permit storage of food packages of various sizes, the central door shelf can be adjusted in height. Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. For more thorough cleaning, the top and bottom door shelves can be removed by pulling them in the direction of the arrows, then refitting them in position. Pay careful attention to where the cabinet is placed. When installed correctly the cabinet will consume less energy. Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air will enter the cabinet and cause the compressor to switch on unnecessarily often. To set the temperature, use the relevant buttons for both the refrigerator and freezer compartments. The internal temperature is influenced by the following factors: - Room temperature - How often the door is opened - Amount of food products stored - Appliance setting Caution: Check the state of the frozen foods if the freezer compartment heats up. Unplug the appliance before carrying out any maintenance operation. Warning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians. Bleeding part of the moisture of cooling chamber in form of frost and ice goes with the operation of the refrigerator. Thick frost and ice has an insulating effect, so it reduces cooling efficiency as the temperature increases, it needs more energy, at a certain thickness it does not allow the door of the frozen food compartment to open, possibly the door can be broken. At this type of appliance defrosting fresh food compartment is automatic without any external intervention. The thermostatic control interrupts the operation of compressor at regular intervals for more or less time - during this cooling is interrupted temperature of the fresh food compartment increases and defrosting occurs. after defrosting the thermostatic control restarts operation of the system. Melting water flows through defrost water outlet into the evaporative tray maintained on the top of compressor and evaporates due to warmth of it. Check and clean the outlet of melting water coming during defrosting regularly. [. . . ] Problems may be due to causes which can easily be solved before calling the Technical Service. please follow these instructions: SYMPTOM Door does not close SOLUTION Weight surpasses the storage limit of the door shelf so spread weight more evenly or take some products out. It is too warm inside the refrigerator Set a lower temperature. Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages. [. . . ]