User manual AEG-ELECTROLUX S2874-6KA

[. . . ] SANTO Electronic Refrigerators Operating Instructions 818 21 99-00/3 Dear customer, Before placing your new refrigerator into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] Otherwise the compressor may be damaged. Please clean the appliance interior and all accessories prior to initial start-up (see section: "Maintenance and Cleaning"). 1 Initial Start-Up 0 1. Set the refrigerator to the desired temperature (see section: "Temperature Adjustment"). 3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached. 17 818 21 99-00/3 Temperature Adjustment With the buttons for temperature adjustment the desired temperatures in the refrigerator can be adjusted. Press either the , , +" (WARMER) or , , -" (COLDER) button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display. To adjust to a warmer temperature, press the , , +" (WARMER) button. To adjust to a colder temperature, press the , , -" (COLDER) button. The changed setting is immediately displayed on the temperature display. The temperature is adjusted by one display field with each press of a button. Note: From a food science point of view, +5 °C for the refrigerator compartment should be considered cold enough as a storage temperature. 3 When the buttons are not further pressed after an adjustment has been made, after a short period (approx. 5 sec. ) the temperature display switches over and again displays the ACTUAL temperature in the refrigerator. The display changes from flashing to continuous illumination. FAST CHILL The FAST CHILL function is suited for quick cooling of large quantities of goods in the refrigerator, e. g. The FAST CHILL function is switched on by pressing the FAST CHILL but- ton. The FAST CHILL function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. The FAST CHILL function is ended automatically after a period of 6 hours. The originally selected DESIRED temperature is again valid. The temperature display shows the ACTUAL refrigerator temperature. The FAST CHILL function can be ended manually at any time by pressing the FAST CHILL button again. The yellow light goes out. 18 818 21 99-00/3 Switching the Appliance off 0 1. To switch off, press the ON/OFF button until the mains power light extinguishes. [. . . ] ­ 89/336/EWG dated 3 May 1989 (including guideline change notice 92/31/EWG) - EMV guideline 28 818 21 99-00/3 Technical Terminology · Refrigerant Liquids that can be used to a generate a cooling effect are known as refrigerants. They have a relatively low boiling-point, indeed so low, that the warmth from the food stored in the fridge or freezer can cause the refrigerant to boil and vaporise. · Refrigerant Circuit Closed circulation system that contains the refrigerant. The refrigerant circuit comprises primarily of an evaporator, a compressor, a condenser and pipe work. [. . . ]