User manual AEG-ELECTROLUX S70318KG5

[. . . ] Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] The summer holidays) without the formation of a bad smell. Press continuosly button (B) until the letter "H" (Holiday) appears on the temperature indicator. the temperature indicator can modify the displayed temperature up to +8°C , 1° at a tim. 8°C will be followed by the letter "H". now the refrigerator is in the "holiday" function in the energy-saving mode. The fridge compartment must be empty with holiday function on. To turn off the refrigerator press the button "B" several times until the symbol "OF" appears in the temperature indicator (C). Press the button "B" again for about 5 seconds. When "1" appears the refrigerator is turned off. You should always slide one of the full size glass storage shelf into the lowest set of guides, above the fruit and the vegetable containers, and keep it in this position. To do this pull the storage shelf forward until it can be swivelledupwards or downwards and removed. Depending on the food stored, the upper door racks can be changed to other holders or removed. Take out the refrigerators food, press the door racks digonally upwards at their edges, reposition them, and press them back into place. The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, , , I" or , , K"). Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours. If neither button is pressed, the temperature display automatically switches back after a short period (approx. The temperature display can indicate several pieces of information. ⷠDuring normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed. ⷠWhen the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature). The alarm light flashes since the temperature is reached. The temperature display will immediately show the changed setting. [. . . ] The cold in the frozen food will then be used to cool the fridge. ⷠKeep the heat emitting condenser, the metall grille on the rear wall of your appliance, always clean. A malfunction may be caused by only a minor fault that you can rectify yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case. [. . . ]