User manual AEG-ELECTROLUX S75400KG8

[. . . ] S 75400 KG S 75400 KG8 Refrigerator freezer combination Instruction book A/AE/7-2. (08. ) 200372733 PERFEKT IN FORM UND FUNKTION Dear customer, Before switching on your new appliance please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. [. . . ] This compartment is indicated for the best conservation of fresh food like fish, meat, seafood because the temperature is lower here than in the rest of the fridge. It is placed in the lower part, directly above of the vegetable drawer. 16 Operating and indicator panel Freezer G. FROSTMATIC function "on" indicator (yellow) H. Temperature setting button (for warmer temperatures) J. Temperature setting button (for colder temperatures) L. Alarm reset button M. Alarm reset light Temperature setting buttons The temperature is adjusted using the (I) and (K) buttons. These buttons are connected to the temperature display (J). The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, (I) or (K). Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours. If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec. ) to the display of the ACTUAL temperature. DESIRED temperature means: The temperature that has been selected for inside the freezer. The DESIRED temperature is indicated by flashing numbers. ACTUAL temperature means: The temperature display indicates the current temperature inside the freezer. The ACTUAL temperature is indicated with illuminated numbers. Temperature display The temperature display can indicate several pieces of information. During normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed. When the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature). 17 Starting Up - Setting the Temperature 1. Plug the mains plug into the mains socket. The alarm light (M) flashes since the temperature is reached. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display. Set the required temperature by pressing the (I) or (K) buttons (see section "Temperature setting buttons"). [. . . ] (all the four feet should be on the floor). Inasmuch as the advice does not lead to result, call the nearest Service Force Centre. 26 How to change the bulb Should the light fail to work you can change it as below: Disconnect from the electricity supply. Press the rear hook (1) of the lampcover by a screwdriver and at the same time pull and rotate the cover in the direction indicated by the arrow (2). (Bulb type: T25 Daylight 230-240 V, 25 W, E 14 thread) After changing the bulb replace the cover, snap it in place and reconnect the electricity supply. Electrical connection This refrigerator is designed to operate on a 230 V AC (~) 50 Hz supply. The plug must be put into a socket with protective contact. [. . . ]