User manual AEG-ELECTROLUX SANTO 75438 KG

[. . . ] Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] 4 seconds the operating mode HOLIDAY is activated, HOLIDAY lights up. Do not store any goods in the refrigerator when the holiday mode is in operation. The temperature is regulated at about +14 °C when the holiday mode is in operation. To switch the entire appliance off, remove the mains plug or switch off. If the appliance is not to be used for an extended period: 1. Leave the doors open after defrosting to avoid accumulation of odours. The control and information systems consist of a temperature display, an optical warning indicator light and an acoustic warning. The system warns: ­ when there was a power cut; ­ when the temperature in the refrigerator or freezer compartment is too high; ­ if there are functional disturbances at the appliance. After an interruption to the power supply, POWER is displayed in the display and the current Actual temperature is displayed again. The appliance continues to run with the previously selected settings. The POWER indicator goes out, as soon as any button is pressed. An alarm sounds and the TEMPERATURE indicator and red back light flash, as soon as the temperature in the freezer section rises above -11 °C. in addition the temperature display for the freezer section flashes. If the temperature in the freezer section falls back below -11 °C, the alarm automatically switches itself off. You can turn off the alarm and the red back lighting using the RESET button. For 5 seconds the temperature display for the freezer section shows the warmest temperature that was reached in the freezer section during the temperature warning. After that the temperature display stops flashing and switches back to the current temperature in the freezer section. The TEMPERATURE indicator continues to flash, as long as there is a temperature warning. If there is an interruption to the power supply during an alarm, when the appliance is reconnected to the supply, it starts with an acoustic and visual alarm. If the possibility of partial or complete thawing exists, you should check the quality of the foods. A rise in temperature may be caused by: ­ frequent door opening for long periods of time; ­ loading with large quantities of warm foods; ­ high ambient temperature; ­ an error with the appliance. If the appliance's electronics recognise a technical problem that has to be remedied by the Customer Service Department, an alarm sounds and the SERVICE indicator appears back lit with a flashing red light. [. . . ] Do not perform any other work on the appliance if the following information does not provide assistance in your specific case. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or our Customer Service. Turn the temperature Appliance cools too much. [. . . ]