User manual AEG-ELECTROLUX SANTO K 9 12 49-6 I

[. . . ] Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] The DESIRED temperature must be reached within 24 hours. Once the required temperature has been set, after a short period (approx. ) the temperature indicator will show again the current ACTUAL temperature inside the corresponding compartment. the temperature indicator will change from flashing to continuous illumination. For a correct storage of the food the following temperature should be set: · +5 °C in the fridge When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the storage temperature within the fridge is reached quickly you can store food immediately after switching on. The COOLMATIC function is suitable for quick cooling of large quantities of goods in the refrigerator. The COOLMATIC function stops automatically after about 6 hours. The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming. The FROSTMATIC function stops automatically after about 48 hours. Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brandnew product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer. The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. For better use of space, the front half-shelves can lie over the rear ones. The door half shelf can be placed at different heights. Lift the shelf with the door half shelf upwards and out of the holders in the door 2. remove the retaining bracket out of the guide under the shelf 3. Reverse the above operation to insert the half shelf at a different height. The bottle holder hooked onto one of the internal shelves can be used to store bottles or cans. To remove this holder, lift the back of the shelf, press and pull it out. [. . . ] Let the product temperature decrease to room temperature before storage. Start immediately after pressing the COOLMATIC or FROSTMATIC switch, or after changing the temperature. The compressor starts after a period of time. Make sure that products do not touch the rear plate. [. . . ]