User manual AEG-ELECTROLUX SBL288

[. . . ] 16 n Bruksanvisning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 q Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . u Èíñòðóêöèþ ïî ýêñïëóàòàöèè. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 1 A C B D E F G K J L M H 2 2 3 4 5 3 g g Dear Customer, Please read these operating instructions through carefully. [. . . ] · Do not hold any hard objects (e. g. a spoon) in the blade when running and do not reach into the blender jar with your hands. · The manufacturer is not liable for any damages which are caused by using the appliance for any other purpose than that intended or incorrect use. · When you have finished working with the appliance, switch it off and unplug ist from the electricity supply. 1 Safety instructions The safety standards of Electrolux electric appliances are in keeping with the recognised rules of technology and the law governing the safety of appliances. Nevertheless as a manufacturer we are committed to familiarise you with the following safety instructions: General safety · The appliance may only be connected to a power supply whose voltage and frequency comply with the specificati-ons on the rating plate!· Never pick up the blender if ­ the lead is damaged, ­ the housing is damaged. 4 g ; This appliance complies with the following EC directives: · 73/23/EEC of 19/2/1973 , , Low voltage directive", including the Modification directive 93/68/EEC · 89/336/EEC of 3/5/1989 , , EMC directive", including the Modification directive 92/31/EEC 0 Position the jar on the base and turn it clockwise to lock it into position (fig 4). 0 Position the lid on the jar and turn it clockwise to lock it into position (fig 5). 3 Technical Data Mains voltage: 230V Power: 400W Thanks to the 2-way safety system it is only possible to operate the blender when the jar and the lid are located in the proper position (fig 4 and 5). See also , , 2-way safety system". Operating the blender Always place the blender on a flat, clean and non-slippery surface before operating it. 0 Open the lid (fig 1/B) and add all necessary ingredients to the blender jar. Replace the lid and the pouring hole cover. Important: Do not exceed the maximum capacity! 2 Disposal Dispose of the packaging! Dispose the packaging material of your appliance correctly. All packaging materials are environmentally friendly and can be disposed of without any danger or burnt in the refuse incinerator. The boxes are made from recycled paper and should be returned to the old paper collection. 3 Dispose of your old appliance! When you eventually stop using your appliance please bring it to the nearest recycling centre or to your dealer who will take it back for a small fee. Additional ingredients may be added through the pouring hole while the blender is operating. Always replace the pouring hole lid to avoid splashing. 0 Start the blender by pressing one of the speed buttons (fig 1/J) or the Pulse button (fig 1/K). 3 Operating instructions The blender can be used for mixing liquids, crushing ice, chopping, grinding and grating of fruits and vegetables, whipping cream etc. Assembling the blender To use the blender start by assembling the jar, then place the jar on the motor base as described below. 0 Place the rubber sealing ring on the blade assembly (fig 2). 0 Position the blade assembly on the inside of the jar (fig 3). Turn it anticlockwise to lock it tightly into position. Important: There is a risk of injury! It is advisable to start at speed setting 1 and then increase to speed 2 or 3. Pushing the Pulse button will operate the blender at the highest speed setting. [. . . ] Pour warm water and some drops of washing liquid into the jar. Mix the liquid by pressing the Pulse button for a short while. Clean the motor base by whipping it with a damp cloth. Should there be a need, the blade assembly can be cleaned separately. [. . . ]