User manual AEG-ELECTROLUX SC91843-5I

[. . . ] SANTO C 9 18 43-5i Integrated Fridge Freezer Operating and Installation Instructions AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www. aeg. hausgeraete. de 2223 367-91 01/06 Dear customer, Before switching on your new fridge/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] Customer Care Department Major Appliances AEG Domestic Appliances Addington Way Luton Bedfordshire LU4 9QQ Tel: 08705 350 350* *calls to this number may be recorded for training purposes Variable Inner Door The door compartments can be pulled up and removed, and inserted at other positions as needed. Variable Storage Box Some models are equipped with a variable storage box which is fitted under a door shelf compartment and can be slid sideways. The box can be inserted under any door shelf compartment. To change the position of the storage box; lift the shelf compartment with the box upwards and out of the holders in the door and remove the retaining bracket out of the guide under the shelf compartment. Reverse the above operation to insert the shelf at a different height. . 9 1. 2. 20 Operating and indicator panel Appliance °C °C ON/OFF Changing the Light Bulb Warning!Before changing the light bulb, switch off the appliance and unplug it. 25 W To switch off the appliance, press the ON/OFF button (I). To change the light bulb press on the rear hook and at the same time slide the cover in the direction indicated by the arrow. Switch the appliance back on. °C °C ALARM OFF 1. ON/OFF H I J K L M N O P 2. P. Mains pilot indicator (green) ON/OFF button for the appliance Temperature setting button (for warmer temperatures) Temperature display freezer Temperature setting button (for colder temperatures) FROSTMATIC function "on" indicator (yellow) FROSTMATIC button Alarm reset light Alarm reset button The temperature is adjusted using the , , J" and , , L" buttons. These buttons are connected to the temperature display. The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, , , J" or , , L". Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours. If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec. ) to the display of the ACTUAL temperature. DESIRED temperature means: The temperature that has been selected for inside the freezer. The DESIRED temperature is indicated by flashing numbers. ACTUAL temperature means: The temperature display indicates the current temperature inside the freezer. The ACTUAL temperature is indicated with illuminated numbers. 4. 6. Temperature setting buttons · · 10 19 Symptom Possible Cause Appliance is not switched on Mains plug is not plugged in or is loose. Remedy Switch on the appliance. Electrical malfunctions are to be corrected by an electrician. Turn the temperature control knob to a warmer setting. [. . . ] Do not touch frozen food with wet hands. Place food to be frozen in the upper drawer. Unfrozen food must not touch items already frozen, otherwise the frozen food could begin to defrost. Press the fast freeze button 24 hours before introducing fresh food for freezing. [. . . ]