User manual AEG-ELECTROLUX SK78800-5I

[. . . ] SANTO Built-In Refrigerator Operating and Installation Instructions K 78800-5 i Dear customer, Before switching on your new appliance please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. Important The wires in the mains lead are coloured in GREEN & YELLOW 13 AMP. FUSE accordance with the following code: Green and Yellow: Earth Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with BROWN the coloured markings identifying the termiBLUE CORD CLAMP nals in your plug, proceed as follows: 1. The wire coloured green and yellow must be connected to the terminal marked with the letter "E" or by the earth symbol or coloured green and yellow. 2. The wire coloured blue must be connected to the terminal "N" or coloured black. 3. The wire coloured brown must be connected to the terminal marked "L" or coloured red. 4. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely. 207 13 AMP 13 Description of the appliance View of the appliance 1 = Butter/cheese compartment 2 = Door shelves 3 = Bottle shelf 4 = Vegetable drawers 5 = Storage shelves 6 = Thermostat 7 = Rating plate Prior to Initial Start­Up Please clean the appliance interior and all accessories prior to initial start-up (see section: "Cleaning and Care"). 14 Starting up and temperature regulation Important!Only use the appliance when built­in!Connect the appliance to the mains electricity supply. When the refrigerator compartment door is opened, the internal lighting is switched on. The temperature control knob is located on the right hand side of the refrigerator compartment. Turn the control knob clockwise past "1". The refrigerating unit is now on and operates automatically. Setting "1" means: Hightest temperature, warmest setting. Setting "6" (end-stop) means: Lowest temperature, coldest setting. Note: From a food safety point of view +5 °C should be considered sufficiently cold for storing food in the fridge. At a low ambient temperature of around 16°C, setting "1" should be selected. At ambient temperatures of around 25°C, select setting "2". If you require a lower temperature, select setting "3" or "4". AEG62 Important!on hot summer days) and a cold setting on the thermostat (position"5" to "6") can cause the compressor to run continuously. [. . . ] Press the light bulb cover as shown and slide it backwards. Refit the light bulb cover and the screw. Put the refrigerator back into operation. AEG65 Noises during Operation The following noises are characteristic of refrigeration appliances: · Clicks Whenever the compressor switches on or off, a click can be heard. · Humming As soon as the compressor is in operation, you can hear it humming. [. . . ]