User manual AEG-ELECTROLUX SMART360

[. . . ] Do not pick up hot cinder or lighted cigarette ends. Avoid tugging on the mains cable and check cable regularly for damage. [. . . ] Hard floors: Use the floor nozzle with the lever in vertical position. Loose rugs/curtains/lightweight fabrics: Reduce the suction power. Use the floor nozzle for loose rugs and the upholstery nozzle for curtains, cushions etc. We recommend the dustbag is changed after using a carpet cleaning powder if there is a bad smell from the cleaner, then you should also change the filter Note: Use only AEG original dustbags and filters (ref GR50). Dust bag safety device: To avoid damaging the cleaner do not use it without a dustbag. A safety device is fitted which prevents the cover closing without a dustbag. Do not attempt to force cover shut. Confined areas: Use the crevice nozzle for crevices, corners and radiators. Dustbag indicator and changing the dustbag (see page 5) For peak performance the dustbag must be changed when full. If the dustbag should accidentally get broken in the cleaner, take cleaner to an AEG Service Centre for cleaning. Check the dustbag regularly and replace when necessary. The dustbag indicator window will gradually turn red when filling and completely red when full. To check the dustbag, the cleaner must be switched on, with all attachments connected and off the floor. The dustbag full indicator may signify that the bag is blocked (occasionally caused by very fine dust) which will cause loss of suction and may result in overheating. If this occurs change the dustbag even if it is not full. To change the dustbag Release catch and swing back lid before removing the dustbag. [. . . ] Clear blockage and/or replace filter(s) and restart. The clearing of blocked hoses is not covered by the guarantee. [. . . ]