User manual AEG-ELECTROLUX STF340

[. . . ] Loosen jammed pieces of toast with a blunt wooden implement (e. g. Ensure that you do not touch the heater elements during this process. · Do not reach into the toasting slot with your fingers or metal implements ­ there is a risk of injury and damage to the appliance. · Depending on the model, the toaster is equipped with a lid for the toasting slot. [. . . ] · Depending on the model, the toaster is equipped with a lid for the toasting slot. The lid must not be fitted when the appliance is in use, there is a risk of fire. Only put the lid on the appliance when it has cooled to room temperature. · The outer housing of the toaster is thermally insulated. However the metal parts in the toasting slot and on the base of the appliance will become hot ­ there is a risk of burns!· Do not use the appliance if the mains cable is damaged or the housing is visibly damaged. 1 Using the warning triangle and/or the key words (Danger!, Caution!, Important!), information that is important for your safety or the correct functioning of the appliance is highlighted. It is essential that this information is observed. 0 This symbol guides you step by step through the operation of the appliance. 3 2 Next to this symbol you will find additional information and practical tips on using the appliance. Tips and information about the economical and ecological use of the appliance are marked with a cloverleaf. Appliance Description (Figure 1) A B C D E F G H J K L Roll rack for crisping up bread rolls Toasting slot Thermally insulated outer housing Crumb drawer Browning control with safety switch Start lever and bread lift* Defrost button with indicator lamp* Stop button* Warm up button with indicator lamp* Rating plate (on the underside of the appliance) Toasting slot lid for protection from dirt* * depending on model 4 g · The mains cable is of a special type and is only to be replaced by an Electrolux customer service centre since special tools are required for its replacement. · Repairs to electrical equipment may only be performed by qualified service engineers. By lifting the start lever (bread lift function) the toasted bread can be lifted sufficiently such that it is easy to remove (Figure 4). 5 g The Safety Switch and Adjusting the Browning Setting (Figure 2) Using the rotary knob you can continuously adjust the browning setting from 1-6 as required. Use a setting between 1 and 3 when you first start toasting. If the toast is not browned to your liking, set the adjuster lower or higher, higher for example when toasting rye or dark bread. When toasting only 1 slice and also when toasting bread that is no longer fresh, use a slightly lower browning setting. Roll Rack (Figure 6 and 7) Due to the nature of the function of the appliance, the roll rack will become hot during toasting, therefore never touch the metal parts. Pull the lever to the rear to open the roll rack. Place rolls or other bread for crisping on the rack, turn the browning control to the required browning setting. Switch on the toaster using the start lever. When the toaster has switched off, turn the bread. Never place rolls or bread directly on the toasting slot. Do not use the roll rack (Figure 7) as a carrying handle. 0 0 0 0 3 3 The electronic toasting time regulator ensures that once a browning setting has been chosen, the results are always the same for the same type of bread. [. . . ] When the toaster has switched off, turn the bread. Never place rolls or bread directly on the toasting slot. Do not use the roll rack (Figure 7) as a carrying handle. 0 0 0 0 3 3 The electronic toasting time regulator ensures that once a browning setting has been chosen, the results are always the same for the same type of bread. Once you have finished toasting we recommend always turning the rotary knob for the browning setting to ·. [. . . ]