User manual AEG-ELECTROLUX SZ91203-5I

[. . . ] Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] During operation, always keep the air ventilation flap closed. The filter should be handled carefully so fragments do not loosen from the surface. Changing the charcoal filter To maintain the best performance the carbon filter should be changed every year. New charcoal filters can be purchased 1 from your local dealer. The filter is placed behind the cover and can be reached by pulling the cover outward (1). The charcoal filter is then pulled out of its slot. Standby time The oil for automatic lubrication contained in the compressor may flow into the refrigeration circuit if the appliance is transported in an inclined position. To allow the oil to flow back into the compressor, wait approximately 1 hour before placing the appliance in operation. The temperature display will immediately show the changed setting. With each further press of one of the two buttons, the DESIRED temperature is adjusted by 1°C. adjustable temperature range: +3°C to +8°C. Note: From a food safety point of view, +5°C for the refrigerator compartment should be considered cold enough as a storage temperature. Once the required temperature has been set, after a short period (approx. ) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached. This quickly cools food stuffs and ensures optimal distribution of the temperature between the fridge and the LONGFRESH 0°C compartment. This results in the fan operating at different speeds for different lengths of time. This is quite normal and not a fault with the appliance. The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator, e. The TURBO COOLMATIC function is ended automatically after a period of 6 hours. The originally selected DESIRED temperature is again valid and the compartment will return to. [. . . ] Selective ordering of replacement parts can save unnecessary travel and costs. For this reason always provide the following appliance information: · ) This information can be found on the serial plate in the interior at the left of the appliance. We recommend that you enter this information here, so that it is handy if needed. Note: The customer bears the costs of unjustified customer service calls even during the guarantee period. [. . . ]