User manual AEG-ELECTROLUX SZ91802-4I

[. . . ] Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] The charcoal filter is then pulled out of its slot. Standby time The oil for automatic lubrication contained in the compressor may flow into the refrigeration circuit if the appliance is transported in an inclined position. To allow the oil to flow back into the compressor, wait approximately 1 hour before placing the appliance in operation. The temperature display will immediately show the changed setting. With each further press of one of the two buttons, the DESIRED temperature is adjusted by 1°C. adjustable temperature range: +3°C to +8°C. Note: From a food safety point of view, +5°C for the refrigerator compartment should be considered cold enough as a storage temperature. Once the required temperature has been set, after a short period (approx. ) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached. This quickly cools food stuffs and ensures optimal distribution of the temperature between the fridge and the LONGFRESH 0°C compartment. This results in the fan operating at different speeds for different lengths of time. This is quite normal and not a fault with the appliance. The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator, e. The TURBO COOLMATIC function is ended automatically after a period of 6 hours. The originally selected DESIRED temperature is again valid and the compartment will return to. The TURBO COOLMATIC function can be ended manually at any time by pressing the TURBO COOLMATIC button again. Note: The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. Mains power supply, the appliance returns to the same operating state as before the interruption of main power. If the appliance is not going to be used for an extended period: 1. Switch off the appliance by holding down the ON/OFF button until the display goes off (see above). [. . . ] Selective ordering of replacement parts can save unnecessary travel and costs. For this reason always provide the following appliance information: · ) This information can be found on the serial plate in the interior at the left of the appliance. We recommend that you enter this information here, so that it is handy if needed. Note: The customer bears the costs of unjustified customer service calls even during the guarantee period. [. . . ]