User manual AEG-ELECTROLUX T57810

[. . . ] LAVATHERM 57810 Condensation dryer User Information Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance. 1 3 2 The following symbols are used in the text: Safety instructions Warning!Notes that concern your personal safety. Notes that show how to avoid damage to the appliance. [. . . ] The condensate can be used as distilled water, e. g. However first filter the condensate (e. g. with a coffee filter) to remove any residue and small pieces of fluff. Cleaning heat exchanger 1 18 If the HEAT EXCHANGER (WARMTEWISSELAAR) display is illuminated, the heat exchanger needs to be cleaned. Operating when the heat exchanger is clogged with lint can damage the dryer. This also increases energy consumption. 1. To do this, press the release button on the bottom of the loading opening and open the door to the left. Remove lint from the inside of the door and the heat exchange chamber. Turn both lock washers inwards. 1 5. Use the handle to pull the heat exchanger out of the base and carry it horizontally to prevent any remaining water from spilling. To empty the heat exchanger, hold vertically over a washing-up bowl. 3 Caution!It is best to use a brush or to rinse thoroughly with a shower head. Replace heat exchanger and lock into place (turn both lock washers outwards until they snap into place). The dryer will not operate if the HEAT EXCHANGER (WARMTEWISSELAAR) indicator is still lit. Never operate the dryer without the heat exchanger. 1 19 Cleaning the drum 1 3 Caution!Do not use abrasives or steel wool to clean the drum. Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expected when removed from the dryer. vinegar-based cleaner) to wipe down the inside of the drum and drum ribs. Clean operating screen and housing 1 Caution!Do not use furniture cleaners or aggressive cleaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. What to do if . . . Troubleshooting by yourself If, during operation, the error code (E plus number or letter) appears on the multi-display: Switch the machine off and on again. Press the START/PAUSE (START/PAUZE) button If the error is still displayed, please inform our after-sales service and quote the error code. Problem Possible cause Remedy Mains plug is not plugged in Plug in at mains socket. [. . . ] The guarantee does not apply to defects due to transport which have occurred outside of our responsibility. Nor will the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to respect the assembly instructions or directions for use. Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that result from the addition of non-original accessories or spare parts are not covered by the guarantee. Appliances that are easy to transport may be delivered or sent to the consumer services department. [. . . ]