User manual AEG-ELECTROLUX T58820

[. . . ] LAVATHERM 58820 Condensation dryer User Information Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance. 1 3 2 The following symbols are used in the text: Safety instructions Warning!Notes that concern your personal safety. Notes that show how to avoid damage to the appliance. [. . . ] Store the new programme combination using the OK button. Sound The volume of the acoustic signal can be selected. Turn the programme knob to any programme and press the OPTION (OPTIES) button repeatedly, until the ú SETUP symbol flashes. Press the OPTION (OPTIES) button repeatedly, until SOUND is shown in the display. Press the OPTION (OPTIES) 12. 45 Sound button repeatedly until the NORMAL desired volume (NORMAL, aýaýaýaýBýaýaýaýa LOW, NO SOUND) is shown in aýaýa DEUR T/MIN. Press the OK button to confirm the setting. The icon changes to the next special function. Press the OPTION (OPTIES) button repeatedly until the exit icon is displayed. 20 Water hardness The dryer's degree of dryness detection can be set to the hardness of the washing water. Turn the programme knob to any programme and press the OPTION (OPTIES) button repeatedly, until the ú SETUP symbol flashes. Press the OPTION (OPTIES) button repeatedly, until WATER HARDNESS is shown in the display. Press the OPTION (OPTIES) 12. 45 Water Hardness button repeatedly until the NORMAL desired water hardness aýaýa aýaýaýaýBýaýaýaýa (NORMAL, SOFT, HARD) is DEUR T/MIN. Press the OK button to confirm the setting. The icon changes to the next special function. Press the OPTION (OPTIES) button repeatedly until the exit icon is displayed. Language 1. Turn the programme knob to any programme and press the OPTION (OPTIES) button repeatedly, until the ú SETUP symbol flashes. Press the OPTION (OPTIES) 12. 45 Language: button repeatedly, until ENGLISH LANGUAGE is shown in the display. aýaýa aýaýaýaýBýaýaýaýa DEUR OPTIES OK TIJD T/MIN. Press the OPTION (OPTIES) button repeatedly, until the desired language appears in the display, e. The icon changes to the next special function. Press the OPTION (OPTIES) button repeatedly, until the exit icon appears. 21 Clock 1. Turn the programme knob to any programme and press the OPTION (OPTIES) button repeatedly, until the ú SETUP symbol flashes. Press the OPTION (OPTIES) button repeatedly, until CLOCK is shown in the display. Using the OPTION (OPTIES) 12. 45 Clock button set the desired time. [. . . ] The guarantee does not apply to defects due to transport which have occurred outside of our responsibility. Nor will the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to respect the assembly instructions or directions for use. Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that result from the addition of non-original accessories or spare parts are not covered by the guarantee. Appliances that are easy to transport may be delivered or sent to the consumer services department. [. . . ]