User manual AEG-ELECTROLUX TG100

[. . . ] Allow the appliance to cool sufficiently before cleaning or removing. Always lift only with the thermally insulated handles. 4 5 6 7 g · The mains cable must not come into contact with any hot parts of the appliance. Never place the appliance over or near a naked flame, hot plate or hot oven. · The mains cable with thermostat must never become wet. [. . . ] · The appliance must only be connected to an earthed socket. If necessary an extension cable suitable for 10 A can be used. · Avoid danger of tripping when connecting the power supply cable. This must never come into contact with water or other liquids. · The grill plate must only be put into operation on the base frame and with the drip tray fitted. · Never cover the heater plate with aluminium foil, pots, pans or similar objects, since this can result in an accumulation of heat, which can destroy the plastic components and coating. · Appliance is for indoor use only. · When used in closed rooms ensure adequate ventilation. · It must be ensured each time after cleaning and each time before use that the plug contacts on the heater plate are dry. · The appliance must be switched off and the mains plug withdrawn each time before cleaning and maintenance. · The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use. Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. When the items are browned on both sides, they should be finished at a lower temperature. The food does not dry out and is cooked more evenly. 3 Use of the splash guard is particularly recommended for grilling items containing fat. The splash guard also serves as wind protection out of doors. 0 Insert the thermostat with mains cable (5) fully in the socket on the appliance. 3 Working with the table-top grill 0 Connect the mains cable (5) to the mains supply. 0 Turn the thermostat (5) to the desired setting (1 to 5). 1 = lowest temperature 5 = highest temperature Cleaning and care 1 Withdraw the mains plug every time before cleaning!Dry all parts thoroughly before putting away. Ensure that the plug contacts of the heater plate are dry before connecting the thermostat to the heater plate. If necessary, wipe over with a cloth or shake out water thoroughly. 3 The operating lamp (5/c) on the thermostat is on while the grill is heating up. When the temperature is reached, heating takes place at intervals to maintain the temperature constant. 1 Do not cut food on the grilling surface to prevent damage to the non-stick coating!Ensure that the non-stick coating is not damaged when turning the grilling items! [. . . ] 0 To switch off the appliance, turn the thermostat to "OFF". Withdraw the mains plug every time after use!Allow the table-top grill to cool before removing and cleaning! Thermostat 1 1 Note that water must not penetrate inside the thermostat under any circumstances!Never clean under running water or even in rinsing water. [. . . ]