User manual AEG-ELECTROLUX TR1438

[. . . ] Useful tips and hints Environmental information 2 Contents Operating Instructions. Switching machine on / switching light on . Opening loading door / loading laundry . Removing laundry or loading laundry when necessary . [. . . ] If the water reservoir is full, an active programme will be interrupted automatically and the EMPTY WATER display will light up. In order to continue the programme, the water reservoir must be emptied. The condensed water is not suitable for drinking or for preparing foodstuffs. 1 17 1. Take out drawer containing water reservoir completely (1) and pull up the water reservoir's drainage pipe as far as it will go (2). 3 3 2. Pour condensed water out into a sink or other suitable container. Slide outlet connections in and refit water reservoir. If the programme has been interrupted as a result of the water reservoir being full: Press the START/PAUSE button to continue the drying cycle. The water reservoir has a volume of approx. This is sufficient for around 6kg of laundry which has previously been spun at 800 revolutions/minute. The condensed water can be used as distilled water, e. g. with a coffee filter) to remove any residue and small pieces of fluff. Cleaning the fluff filter 3 If the indicator CLEAN FILTER BASE lights up, the fluff filter in the plinth of the appliance must be cleaned. Tip: The fluff can be removed more easily if it is first dampened e. Re-insert filter housing with holder and filter mat in the base of the appliance. Note: If the holder and filter mat are not inserted in the filter housing, the filter housing cannot be pushed into the base of the appliance. The indicator CLEAN FILTER BASE only goes out when the programme knob has been positioned to OFF. Cleaning the drum 1 3 Caution!Do not use abrasives or steel wool to clean the drum. Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expected when removed from the dryer. Use a damp cloth, which has been soaked in water and a little vinegar, to wipe the inside of the drum and drum ribs. Clean operating screen and housing 1 20 Caution!Do not use furniture cleaners or aggressive cleaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. What to do if . . . Troubleshooting by yourself If, during operation, the error code (E plus number or letter) appears on the multi-display: Switch the machine off and on again. [. . . ] · The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. · All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property. · This guarantee is in addition to your statutory and other legal rights. [. . . ]