User manual AEG-ELECTROLUX USR400

[. . . ] Plastic parts must not be placed on or close to radiators. The Universal Slicer is a household appliance and therefore not suitable for commercial use. The Universal Slicer may only be used once it has been positioned in accordance with instructions. Use the appliance only for slicing ordinary household foods; do not use it for any other purpose. [. . . ] To do this, turn the slice thickness adjustment knob (D) anticlockwise (Fig. The slices can be set to any thickness between thin and approx. The graduations on the slice thickness adjustment knob do not represent millimetres, but serve only as points of reference. For safety reasons the starting position (0) is designed to cover the blade. Technical Data Power consumption: 110 W Mains voltage: 230 V Switching On the Universal Slicer Using the On/Off switch (A) it is possible to switch the appliance on and off in two operating modes (Fig. 4): · Pulse: press switch to position II. The circular blade (G) will rotate for as long as the switch stays pressed in this position. · To stop pulse operation: release the switch and wait until the circular blade has come to a complete standstill. 5 minutes): engage the switch in position I. The circular blade will rotate without the need to hold the switch down. · To stop continuous operation: press the switch briefly to position II and wait until the blade has come to a complete standstill. Please note: after the appliance is switched off, the circular blade continues to rotate for a short time. ; This appliance complies with the following EU Directives: · 73/23/EEC dated 19. 2. 1973 "Low Voltage Directive", including Amending Directive 93/68/EEC. · 89/336/EEC dated 3. 5. 1989 "EMC Directive", including Amending Directive 92/31/EEC. · 89/109/EEC Foodstuffs Directive. Positioning the Appliance The Universal Slicer should be positioned on a level, clean and dry work surface where the non-slip rubber feet will ensure that the appliance is secure and does not move. We recommend wiping all parts with a slightly damp cloth and then drying before using for the first time. 9 g For safety reasons, after each use please return the stop plate (B) to the starting position (0) using the slice thickness adjustment knob (Fig. recess of the housing cover and stop plate. Screw in the blade lock in an anticlockwise direction (left-hand rotation) and tighten. Instructions for Use To operate the Universal Slicer safely and to obtain even slices, place the food to be sliced on the food carriage and press the food gently against the stop plate, if possible using the holder (Figs. With the blade rotating, guide the food carriage with the food to be sliced towards and against the circular blade, applying slight pressure. After use return the stop plate to the starting position (0) using the slice thickness adjustment knob. Cleaning The circular blade must be stationary before the slicer is cleaned. Before cleaning it is essential to return the stop plate to the starting position (0) and remove the plug from the mains. Clean the appliance thoroughly from time to time as perishable food remains can collect on the appliance and behind the circular blade (G). The remaining parts can be washed in water by hand as usual or washed in a dishwasher at a maximum temperature of 50 °C. Wash the circular blade carefully by hand (risk of injury) in warm soapy water, not in the dishwasher (rust spots can form). [. . . ] Nicht unter die Garantie fallen Schäden oder Mängel aus nicht vorschriftsmäßiger Handhabung sowie Nichtbeachtung der Gebrauchsanweisungen. Im Garantiefall senden Sie das Gerät an die für Ihren Wohnort zuständige AEG Kleingeräte-Zentralwerkstatt oder übergeben es Ihrem Fachhändler. Bei Einsendung achten Sie bitte auf gute Verpackung, Ihre vollständige AbsenderAnschrift und eine kurze Fehlerbeschreibung. Fügen Sie zum Nachweis Ihres Garantieanspruchs den Kaufbeleg bei. [. . . ]