User manual AEG-ELECTROLUX VAMPYR400

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] It gives good washing results in a short time. 5) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. Com Write down the product number (PNC) that is on the rating plate. You cannot activate or deactivate the options while a programme operates. If one or more options are set, make sure that the related indicators are on before the programme starts. Activate this option only when you use the combi detergent tablets. Press Option again and again until the multitab indicator comes on. Press Option again and again until the multitab indicator goes off. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: · If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode. Starting a programme without delay start Press Program again and again until the indicator of the programme that you want to set comes on. Starting a programme with delay start Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). The display shows the countdown of the delay start that decreases with steps of 1 hour. Opening the door while the appliance operates if you open the door , the appliance stops. When you close the door, the appliance continues from the point of interruption. Press Delay again and again until: · If you do not press the on/off button, the AUTO OFF device automatically deactivates the appliance after some minutes. This helps to decrease the energy consumption. Let the dishes become cold before you remove them from the appliance. First remove the items from the lower basket, then from the upper basket. [. . . ] Make sure that the spray arms can move freely before you start a programme. Do not use more than the correct quantity of detergent. Other products can cause damage to the appliance. The rinse aid helps, during the last rinsing phase, to dry the dishes without streaks and stains. [. . . ]