User manual AEG-ELECTROLUX VAMPYR5045

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] The appliance contains features which help you save energy during everyday cooking: · Residual heat: ­ When the heating function or programme operates, the heating elements are deactivated 10 % earlier (the lamp and fan continue to operate). For this feature to operate, the cooking time must be longer than 30 minutes or you must use the clock functions ( Duration , End Time ). ­ When the appliance is off, you can use the heat to keep food warm. Deactivating the display - If necessary, you can fully deactivate the appliand at the same ance. Cooking with the lamp off - Touch for 3 seconds to deactiand hold vate the lamp during cooking. Put the second end of the draining pipe (C) into a container. Put it at a lower position than the outlet valve (A). Open the oven door and put the connector (B) into the outlet valve (A). Push the connector again and again when you empty the water tank. Remove the connector from the valve when the water stops flowing. Do not use the drained water to fill the water tank again. To use it, it is necessary to input the food weight. Only use the core temperature sensor supplied with the appliance or genuine replacement parts. Put the tip of the core temperature sensor into the centre of the meat. Put the core temperature sensor plug into the socket on the front of the appliance. The end time is different for different quantities of food, the set oven temperature (minimum 120 °C) and the operating mode. the appliance calculates the end time in approximately 30 minutes. Make sure that the core temperature sensor stays in the meat and in the core temperature sensor socket during the cooking. If necessary, you can set a new core temperature during the cooking. Do this, touch When the meat is at the set core temperature, an acoustic signal sounds. the appliance deactivates automatically. Touch a sensor field to stop the signal. [. . . ] Rinse the water tank and clean the remaining lime residue in the oven with a cloth. Clean the drain pipe by hand in warm water with soap. Soft water with low lime content the manufacturer recommends this because it decreases the quantity of cleaning procedures. ⷠTap water - you can use it if your domestic water supply has purifier or water sweetener. [. . . ]