User manual AEG-ELECTROLUX VAMPYR5090.1

[. . . ] Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present. Store your cleaner indoors in a cool, dry area. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding. [. . . ] Handle Telescopic tube Combination carpet / hard floor nozzle Turbo nozzle Dust bag, s-bag® Dust bag Holder Dust compartment cover Hose Accessories on board 3 in 1 multi tool nozzle to be found in the back of the cleaner. Insert the hose into the canister until the catches click to engage (press the catch buttons to release the hose). Insert the hose into the hose handle until the catches click to engage (press the catches to release the hose). attach the telescopic wand to the hose handle so that the catches clicks shut. Remove by pressing the release button and pulling the pieces appart. Attach the combination carpet / hard floor nozzle to the telescopic wand by inserting the wand into the combination carpet / hard floor nozzle until the catch clicks. Extend the power cord completely and connect it to the outlet. Push same button once more to turn it off. Twist the power control towards "min" to decrease suction power. additional suction power control: Use the suction control on the hose handle. 11 A practical parking positions (and at the same time a backsaving feature) when you pause during cleaning. 2b Carefully pull the old, dirty filter out of the filter holder and replace with a new filter. 2c Reattach the filter holder containing the new filter. Put the insert holding of s-bag® back in the cleaner and then close the cover. The filter must always be replaced with a new one and cannot be washed. 3a Place your thumbs on the back edge of the lid and then open the lid by pulling the release tabs backwards and upwards with your middle and index fingers. In such cases, disconnect from outlet and allow to cool for 20-30 minutes. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to the hose caused by cleaning it. Cleaning the floor nozzle 5a To avoid loss of suction power, frequently clean the carpet/ hard floor nozzle. The easiest way to clean it is by using the hose handle. cleaning the turbo nozzle 6a Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. [. . . ] Com (Canada) or fill out and return the a ttached warranty registration card. To obtain warranty service you must return the defective cleaner or cleaner parts along with proof of purchase to any Electrolux Authorized Warranty Station. 1-800-896-9756 You may also visit us online at www. Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. [. . . ]