User manual AEG-ELECTROLUX VAMPYR535

[. . . ] So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] Do not use detergent with this programme. 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. Com Write down the product number (PNC) that is on the rating plate. You cannot activate or deactivate the options while a programme operates. If one or more options are set, make sure that the related indicators are on before the programme starts. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Make sure that the salt container and the rinse aid dispenser are full. Start the shortest programme with a rinsing phase, without detergent and without dishes. This option gives better results for the hygiene. If the option is not applicable to the programme, the related indicator flashes for some seconds and then stays off. This function increases the water pressure by 40% and gives better washing results when dishes are very dirty. The appliance is in setting mode when, after the activation the display shows 2 horizontal status bars. If the control panel shows other conditions, press Reset until the appliance is in setting mode. Starting a programme without delay start If you want, you can set the options. If you open the door while the appliance operates, the display shows the programme duration that decreases with steps of 1 minute. When you cancel a delay start, the appliance goes back to setting mode. Press Reset until the display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. The display shows 0 and the end indicator comes on. If you do not press the on/off button, the AUTO OFF device automatically deactivates the appliance after some minutes. This helps to decrease the energy consumption. Let the dishes become cold before you remove them from the appliance. [. . . ] â· Put the light items in the upper basket. â· Make sure that the spray arms can move freely before you start a programme. There is dishwasher salt and rinse aid (unless you use combi detergent tablets). Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. [. . . ]