User manual AEG-ELECTROLUX VAMPYRCE270.3

[. . . ] Improper repairs can give rise to significant hazards for the user. · In the case of a malfunction, please therefore contact your dealer or AEG customer service directly. · Ensure that a paper filter and a MICROFILTER are always fitted. · Leave wet shampooed carpets to dry completely. [. . . ] Never vacuum liquids with the vacuum cleaner ­ otherwise the vacuum cleaner will be damaged. Furthermore, protection against electric shock may be impaired. · People and animals must not be vacuumed with the appliance. · Keep children away from the appliance. · Do not vacuum up matches, hot ashes or cigarette ends with the appliance. Avoid drawing up hard, pointed objects because these could damage the appliance or the paper filter. · If the appliance is used for purposes other than those intended or used incorrectly, no liability can be accepted for any damage that may be caused. Please read these operating instructions through carefully. Above all please observe the safety instructions on the initial pages of these operating instructions!Please keep these operating instructions for future reference. The rollers ensure that the separation between the floor and underside of the nozzle is always constant ­ this makes it possible to vacuum hard floors without problems. 3 Press the button to remove the floor nozzle (Figure 3). Changing the Filters 1. Paper Filter 0 Open the bag compartment and remove the lid (Figure 7). Bags full of normal household dust may be disposed of with household rubbish. If necessary, wipe out the filter compartment with a damp cloth. 0 Place the new paper filter on the filter carrier (Figure 9). 2 2. MICROFILTER 1 Please note: The MICROFILTER must also be replaced every fifth paper filter change (Figure 10) to maintain optimum suction performance. By renewing the MICROFILTER in good time you will ensure good suction performance and reduce the amount of time spent vacuuming. 0 Insert the lid into the appliance and close by pressing it into place (Figure 11). Converting into a Handheld Appliance / Using the Crevice Nozzle The vacuum cleaner is also easy to use as a handheld appliance. 0 Remove the floor nozzle (Figure 3) and fit the crevice nozzle (Figure 6). 8 g Winding Up the Cable (Figure 12) The vacuum cleaner is equipped with a cable winder. [. . . ] 0 Remove the floor nozzle (Figure 3) and fit the crevice nozzle (Figure 6). 8 g Winding Up the Cable (Figure 12) The vacuum cleaner is equipped with a cable winder. 0 Simply take hold of the plug and pull out the mains cable. 0 To rewind the cable, press the cable rewind button (Figure 2/E). 3 You can press the mains cable into the clip on the upper part of the handle (Figure 13). Storage 3 The appliance can be stored in a manner that saves a considerable amount of space. Leave the floor nozzle fitted to the vacuum cleaner so that it can stand up on its own (Figure 14). [. . . ]