User manual AEG-ELECTROLUX WASL3T101

[. . . ] installation · Unpack or ask for the appliance to be unpacked immediately upon delivery. Check the outside of the appliance is not damaged in any way. Report all transit damage to your retailer. Connection to the water supply must be carried out by a qualified plumber. [. . . ] If you turn the programme selector to another programme while a cycle is in progress, the appliance will ignore the new selected programme. "Err" flashes and the "Start/ pushbutton flashes red for a few Pause" seconds. Selecting the temperature Press the "Temperature" pushbutton repeatedly to increase or decrease the temperature if you want your washing to be washed at a different temperature to the one selected by the appliance (see "Programmes table"). Selecting the spin speed pushbutton to change Press the "Spin" the spin speed, if you want your washing to be spun at a different speed to the one selected by the appliance. At the end of the programme, if you have seor "Night silence lected "Rinse hold" , you then need to select a " Spin " plus" or " Drain " programme to finish the cycle and empty the water. Night silence plus : the cycle contains no spin and ends with a rinse hold. Selecting options You must select the different options after selecting the programme and before presspushbutton (see ing the "Start/Pause" "Programme table"). If one of the options is not compatible with the selected programme, "Rinse plus" option The washing machine will add one or more rinses during the cycle. This option is recommended for people with sensitive skin and in soft water areas. Permanent : Hold down the "Prewash" and "Delay Start" pushbuttons for a few seconds. "Delay start" This option allows you to delay the start of a wash programme by 30, 60, 90, 2 hours to 20 hours. the selected time appears on the display for a few seconds. You can change or cancel the delayed start time at any time before you press the "Start/ pushbutton, by pressing the "DePause" lay start" pushbutton again (0' indicates immediate start). If you have already pressed the "Start/ pushbutton and you want to Pause" change or cancel the delayed start, proceed as follows : · To cancel the delayed start and start the cycle immediately, press "Start/Pause" and then "Delay start" . To change the timer delay period, you position must go through the "Stop" and reprogramme your cycle. the lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pressing the pushbutton. After closing "Start/Pause" the lid again, press the "Start/Pause" pushbutton. Time Manager The cycle can be made longer or shorter by pushbuttons. Type of fabric For heavy soiled items For normal soiled items For daily soiled items For slightly soiled items For very slightly soiled items For items used or worn for a short time For refreshing items only For refreshing a very few items only Start of the programme pushbutton to Press the "Start/Pause" start the cycle ; the corresponding light will apcome on green and the symbol pears on the display (door locked). It is normal for the programme selector to remain stationary during the cycle. Warming up During the cycle, the symbol comes on when the appliance is reaching the right temperature. [. . . ] Only use detergents and additives designed for use in a washing machine. We do not recommend mixing different types of detergents. There are no restrictions on the use of powder detergents. For cycles without prewash, they must be added via means of a dosing ball. [. . . ]