User manual AEG-ELECTROLUX XXL60

[. . . ] € Children should be supervised to ensure that they do not play with the appliance. € The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!€ Never use or pick up the appliance if – the supply cord is damaged, – the housing is damaged. ” • The appliance must only be connected to an earthed socket. [. . . ] Do not immerse the bread maker body in water. If kneader cannot be removed after 10 minutes, hold shaft from underneath pan and twist back and forth until kneader is released. (When the blade folds down automatically from a 30° angle it is completely cleaned. Do not immerse the outside base of the pan, just partially fill with warm soapy water. Outside and inside surfaces are cleaned with a soft damp cloth. 12 11:31 Disposal / Mise au rebut Smaltimento / Cómo desechar el electrodoméstico GB Disposal Packaging materials The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e. Please dispose the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. GB F I E P S NL FI on the product or The symbol on its packaging indicates that this product may not be treated as household waste. Yeast and sugar came into contact with each other before kneading cycle. If using timer, yeast got wet before bread making process started. High humidity and warm weather may have caused dough to rise too fast. Tops of loaves may not all be perfectly shaped, however, this does not affect wonderful flavour of bread. Machine was placed in a draught or may have been knocked or jolted during rising. Not enough salt used or omitted (salt helps prevent the dough over proving). Foldable blade does not stand up during kneading process. Dough too dry and not allowed to rise evenly in pan. If power is cut during operation for more than 8 minutes you will need to remove unbaked loaf from pan and start again with fresh ingredients. reduce amounts to maximum quantities allowed. Allow bread to cool on rack at least 30 minutes before slicing. [. . . ] Carefully rotate cake pan in left and right direction to loosen it. Base for cake pan and bottom base coupling may be deformed or some foreign body inside. 12 11:31 Troubleshooting MACHINE MECHANICS Problem Bread maker not operating/Kneader not moving. Forgot to put kneader in pan or blade did not stand up. [. . . ]