User manual AEG-ELECTROLUX Z352A

[. . . ] Always plug the appliance into a grounded outlet. When using the flexible pipe (21), before releasing the steam, direct the jet of the gun (13) into a container so as to remove the condensation from the pipe. Never leave the appliance unattended when it is connected to the electric network. Do not tilt the appliance more than 45° from its upright position while it is being used in order to prevent hot water from leaking out of the boiler tank together with steam. [. . . ] This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. GROUNDED OUTLET BOX ADAPTER GROUNDED OUTLET BOX GROUNDING BLADE IS LONGEST OF THE THREE BLADES FIGURE A METAL SCREW . . GROUNDING TAB FIGURE B 3 Description of the hand held steamer 1. Flexible pipe 20 15 13 17 18 19 21 2 3 4 11 12 5 1 10 9 8 6 7 Dear Customer, Thank you for choosing this Electrolux Envirosteam Gun which is an ideal cleaning product because of the degreasing and cleaning power of steam which eliminates bacteria, microbes, mites. It is an ecological method of cleaning which does not require the use of chemicals. INSTRUCTIONS FOR USE How to fill the boiler tank before use Unscrew the safety cap (3) and overturn the boiler tank to drain it completely. Fill the boiler tank (figure A) with a measure (9) full of water by means of the funnel (8). How to start the appliance Insert the plug attached to the power cord into the outlet. Steam will be ready after about 3 to 4 minutes. Never unscrew the boiler tank cap unless you are sure that the appliance has been unplugged from the outlet. Fig. A 4 APPLICATION OF THE ATTACHMENTS Straight nozzle: a) fully insert the attachment by pushing it a against the appliance body. Align the mark on the nozzle with the yellow mark on the appliance as shown in figure B. b) turn in a clockwise direction until the mark on the nozzle is perfectly aligned with the two lines on the appliance body. Now the attachment is locked in the central position. Fig. B Round brush and bent nozzle: Both these attachments can be attached to the straight nozzle (Figure C and D), or to the articulated steam nozzle on the appliance body (Figure E and F). Fig. F Flexible pipe, Brush for fabrics and glass wiper: The flexible pipe (21) must be attached to the articulated steam nozzle (2). Then attach whichever accesory you wish to use - the round brush (10), the bent nozzle (11) the straight nozzle (12), then the brush for fabrics (17) . The brush for fabrics comes with a cloth that can be used to clean delicate surfaces such as sofas and armchairs, and with a glass wiper fitted as shown in figure G, as well as for ironing hanging clothing articles (Fig. [. . . ] You may be required to take the product to your nearest service provider if the product requires attention during the first year. There are certain conditions which may invalidate this guarantee: a. It is dependent upon the appliance being correctly installed and used in accordance with the Company's instructions under normal domestic conditions within the United Kingdom or the Republic of Ireland. Service at all times must be carried out by an Electrolux Service Representative or authorised agent. [. . . ]