User manual AEG-ELECTROLUX Z4383

[. . . ] · Use only as described in this manual. Use only manufacturer's recommended attachments. · Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service centre before using. · Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. [. . . ] Please call 08706 055 055 for assistance. IMPORTANT: For future reference we suggest you record the following details here, and keep the receipt with the handbook as proof of purchase. Purchased from ____________________________________________________ Date purchased __________________Model no __________________________ 101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ Features of the Electrolux vacuum cleaner and accessories supplied with it are protected in Great Britain and abroad by Patents or Registered Designs. This appliance conforms with the requirements of the amended E. E. C. 89/336/EEC relating to electromagnetic compatibility (EMC) CE. Electrolux may introduce modifications to their product from time to time, and consequently the details given in this booklet are subject to alteration without notice. Quick Reference QUICK REFERENCE A B C E F G G1 A B C D E F G H I J K Wand Crevice Tool Dusting Brush Hose D K H Base Dust Cup with Lid and Filter Handle ( G1 Turbo Handle) Tool Caddy Rear Housing Hose Retainer Stair Brush J I Stair Brush (some models only) How To Assemble HOW TO ASSEMBLE CAUTION: Assemble the cleaner completely before using. NOTE: All screws must be installed to properly secure the parts of the vacuum. CAUTION: Moving parts, make sure the on/off switch is in the off position and stay clear of the brushroll when plugging in. NOTE: Features may vary by model yet all parts assemble the same. Remove all components from the carton and check that all of the parts are available from the parts list above. Have a Phillips screwdriver available (one is NOT provided in the package). Remove hose from hose adapter on the base of cleaner. Place desired accessory onto end of hose or wand. A Nested Extension Wand to add reach. 15) B Crevice Tool cleans corners, baseboards and between cushions. C Dusting/Upholstery Brush is for furniture, blinds, books, lampshades, shelves, curtains, draperies, cushions and fabrics. 15 B NOTE: When using on hard floors an additional hard floor nozzle is available. Please ring Electrolux Customer Care on 08706 055 055. 10 ROUTINE MAINTENANCE NOTE: Turn off the switch and unplug the electrical cord before routine maintenance. Never operate the vacuum cleaner without the dust cup filter in place. FIG. 16 16a Empty Dust Cup Lift up the latch and pull out to release the dust cup from the housing. To open, turn dust cup lid counter clockwise (move to OPEN position) (FIG. 16a) then grasp dust cup lid and pull dust cup lid out and away from the cup (FIG. The filter stays attached to the lid to make it easier to empty any dust or dirt from the cup into the trash without touching the filter (FIG. 16c). [. . . ] 21) PROBLEM SOLVING Clear Hose Thermal Cut Off Thermal Cut-Off This cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly turns off, follow this procedure: Step 1: Push on/off switch to off. Step 3: Check for source of overheating problem (i. e. full dust cup, clogged hose or clogged filters). [. . . ]