User manual AEG-ELECTROLUX Z5621

[. . . ] Prilozena navodila za uporabo so primerna za uporabo vseh modelov Oxygen. To pomeni tudi, da nekateri dodatni deli morda niso prilozeni modelu, ki ste ga izbrali. Dodatni pribor in previdnostni ukrepi 67 Pred uporabo 68 Kako dosezete najboljsi ucinek 69 Uporaba nastavljivih cevi Back Saver® 70 Zamenjava "s-bagTM" vreck za prah/ciscenje filtrov 71 Ciscenje upogljive cevi in nastavka, Zamenjava baterij 72 Odpravljanje tezav in obvescanje kupcev 73 Slovensky akujeme vám za to, ze ste si vybrali vysávac Elextrolux Oxygen. Tento návod na pouzitie slúzi pre vsetky modely Oxygen. [. . . ] 7 Adjust suction power using the suction control on the vacuum cleaner or the suction control on the hose handle. 8 Press the +/- buttons to adjust suction control (be sure batteries have been inserted beforehand). 4 5 6 7 8 82 English G E T T I N G T H E B E S T R E S U LT S Hard floors: Use the carpet/hard floor nozzle with the lever in position (1). Carpets: Use the carpet/hard floor nozzle with the lever in position (2). Wooden floors: Use the parquet nozzle to avoid scratching. 1 2 3 4 Upholstered furniture: Use the wide crevice or the combination nozzle/brush (3). Curtains, lightweight fabrics, etc. : Use the combination nozzle/brush (3). Frames, bookshelves, etc. : Use the combination nozzle/brush (4) or the feather duster (5). Crevices, corners, etc. : Use the crevice nozzle (6). Using the power nozzle 7 Attach the nozzle to the tube. 8 Use the flex supplied to connect the power nozzle to the socket on the vacuum cleaner. 9 Use the clips to secure the cable along the tubes and hose. 10 The power nozzle starts operating when the vacuum cleaner is switched on. Using the turbo nozzle 11 Attach the nozzle to the tube. 12 Adjust suction power by opening and closing the air vent. 5 6 7 8 Note!Do not use the power or turbo nozzle on skin rugs, rugs with long fringes or rugs with a pile depth exceeding 15 mm. To avoid damaging the carpet, do not keep the nozzle stationary whilst the brush is rotating. Do not pass the nozzle across electric cables, and be sure to switch off the nozzle immediately after use. 9 10 11 12 83 English U S I N G T H E B A C K S AV E R ® T U B E S A 1 B 2 3 The Back Saver® tubes have been designed for use in different positions: General cleaning and cleaning under low furniture. 1 Before you start please note the position of the tubes and catches as indicated on the pictures. Attach the longer tube A to the hose handle and the shorter tube B to the floor nozzle until the catches click to engage. 2 Attach tubes A+B to each other until the catch clicks to engage. 3 Use the tubes in this position for general cleaning. 4a To change position, push the catch on the shorter tube B and turn the shorter tube B a half circle until the catch clicks to engage. 4b Now simply turn the rotary head of the nozzle a half circle. 5 Use the tubes in this position for cleaning under low furniture. [. . . ] 8 To clean the wheels, gently lever them from their mountings and clean as necessary. 9 Replace the cover and make sure it is securely fastened. Cleaning the turbo nozzle 10 Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads, etc. Use the hose handle to clean the nozzle. [. . . ]