User manual AEG-ELECTROLUX Z813C

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. electrolux. com Register your product for better service: www. electrolux. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. electrolux. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. [. . . ] • If you decrease the washing temperature, the Eco Info stripes increases. Some advices to have the most efficient setting: • Set the Time Manager indicators or . • Set the possible lower washing temperature. • Do not set the Prewash option. 7. 9 Child Lock With this option you can prevent that the children play with the control panel. • To activate/deactivate the option, and at the same time press until the indicator comes on/goes off. You can activate this option: , the options and • After you press the programme knob are locked. : the appliance • Before you press cannot start. 7. 10 Permanent extra rinse With this option you can permanently have an extra rinse when you set a new programme. • To activate/deactivate this option press and at the same time until the indicator comes on/goes off. 7. 11 Acoustic signals The acoustic signals operate when: • The programme is completed. To deactivate/activate the acoustic sigand at the same time nals, press for 6 seconds. 12 www. electrolux. com If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 8. BEFORE FIRST USE 1. 2. Put 2 litre of water in the detergent compartment for washing phase. Put a small quantity of detergent in the compartment for washing phase. 3. Set and start a programme for cotton at the highest temperature without laundry. Press the same button again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 9. 9 Opening the door While a programme or the delay start operates, the appliance door is locked and . the display shows the indicator CAUTION!If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: 1. 4. 9. 6 Starting a programme with delay start • Press again and again until the display shows the delay you want to set. The related indicator comes on the display. : • Press – The appliance starts the countdown. – When the countdown is completed, the programme starts automatically. You can cancel or change the set of the delay start before you press . [. . . ] Make sure that the drain filter is not clogged. Make sure that the connection of the drain hose is correct. Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. [. . . ]