User manual AEG-ELECTROLUX Z8215

[. . . ] 1 Attach the telescopic tube to the hose handle and the floor nozzle (certain models have a lock button that must be pressed before the hose and telescopic tube can be pulled apart). If you have a vacuum cleaner with remote control, make sure that the connector is pressed in completely. 1 Electrolux Twinclean features an automatic cord winder (autoreverse). Pull out the power cord and plug into a socket. [. . . ] Note: Do not use the Max In Turbo or Max In motorised nozzles on fur rugs, rugs with long fringes or pile depths exceeding 15 mm. To avoid damaging the carpet, do not let the nozzle stay in one place when the brush is rotating. Do not pass the nozzle over electrical cords, and be sure to switch off the vacuum cleaner immediately after use. 19 When you pause during cleaning, the tube can be attached to the rear of the vacuum cleaner. 0 When storing, the vacuum cleaner can be placed on end and the tube attached at the bottom of the vacuum cleaner. Soulever le support de filtres et le faire pivoter d'un demi-tour pour échanger les filtres, puis remettre en place le support de filtres dans l'aspirateur. How to use the telescopic tube 1 Extend or shorten the telescopic tube by pushing the release button towards the nozzle and simultaneously adjusting the length of the telescopic tube. There is a catch at both ends of the telescopic tube. Certain models only have one release button. Electrolux Twinclean's dust container must be emptied when it is full to the Max sign. Empty it over a wastepaper basket by pressing the release button. Note: The warranty does not cover any damage to hoses caused by cleaning them. If something gets stuck in the vacuum cleaner: Turn off the vacuum cleaner and open the cover at the front of the unit by lifting the release catch. lift out the filter holder and the filters. 8 Lift the cover between the filter wells and remove anything that may have got stuck. also check the bottoms of the filter wells for foreign objects. 9 Refit the cover under the catches and close it by pressing down. Put the filter holder back in place and close the vacuum cleaner cover. If something gets stuck in the vacuum cleaner 0 The Max In and the carpet/floor nozzles should be cleaned frequently to avoid losing suction power. The easiest way to do this is by using the hose handle. 1 The auxiliary wheels should be carefully pulled straight out. Clean as required and put them back in the reverse order. [. . . ] If so, empty it and clean both the box and the filter before putting it back in the cleaner. Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. This product is designed with the environment in mind. Com If you have any comments on the cleaner or the Instructions for Use booklet please e-mail us at: floorcare@ electrolux. [. . . ]