User manual AEG-ELECTROLUX Z8223

[. . . ] If the plug or cable are damaged, the plug and cable assembly must be replaced by returning the product the your local Electrolux Service Agent or similarly qualified person in order to avoid a hazard. Fluids (this can cause serious damage to the vacuum cleaner). The above can cause serious damage to the motor ­ damage which is not covered by the warranty. Disconnect the plug from the wall outlet before cleaning the outside of the vacuum cleaner. [. . . ] Electrolux Twinclean has a dust filter that should be cleaned now and then to secure a constant high suction. When it is time to clean the filter, the filter light on the vacuum cleaner will flash. the filter is cleaned while in the vacuum cleaner. Turn off the vacuum cleaner when the filter light flashes. Open the cover by lifting the release catch. Lift up the filter holder and turn it a half turn so that the filters change places with each other and put the filters back into the vacuum cleaner. 8 Turn the left filter a full turn in the direction of the arrow. The filter light begins to flash and the vacuum cleaner starts, and as you turn, the filter is cleaned. After you have made a full turn, the vacuum cleaner turns off and the filter light stops flashing. About once each year, when the filter light begins to flash more frequently, the filters need to be washed. A Lift out the filters according to the above. B Remove one filter at a time from the filter container (9) by pressing the marked release button and turning the filter. There is no difference in how the filters are cleaned or fitted. 0 Remove the dust container by pressing the release button at the back of the vacuum cleaner and lifting the container. 1 Lift the two snap catches at the back edge of the vacuum cleaner and open the filter cover. Put the filter back into place, close the filter cover and refit the dust container. The vacuum cleaner automatically stops if there is a blockage in the nozzle, tubes or hose or if the filter or filter holder becomes blocked. Pull out the power plug and allow the vacuum cleaner to cool down for 0­0 minutes. Use a suitable implement to clear the tubes and hose of blockages. It is sometimes possible to clear the hose by "massaging" it. [. . . ] Com If you can´t find accessories to your Electrolux vacuum cleaner, please visit our website at www. This product is designed with the environment in mind. Com If you have any comments on the cleaner or the Instructions for Use booklet please e-mail us at: floorcare@ electrolux. Com If you can´t find accessories to your Electrolux vacuum cleaner, please visit our website at www. [. . . ]