User manual AEG-ELECTROLUX Z950

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. electrolux. com Register your product for better service: www. electrolux. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. electrolux. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. [. . . ] How to activate the acoustic signal for the end of programme 1. Press the on/off button to activate the appliance. Press and hold Program until the prostarts to gramme indicator flash and the programme indicator comes on with fixed light. ENGLISH 7 6. Make sure that the set level of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Processing residues can stay in the appliance. Do not use detergent and do not load the baskets. 6. 1 Adjusting the water softener Water hardness German degrees (°dH) > 24 22 - 24 20 - 22 18 - 20 16 - 18 13 - 16 10 - 13 7 - 10 4-7 <4 1) Factory position. 2) Do not use salt at this level. French degrees (°fH) > 40 39 - 40 35 - 39 32 - 35 28 - 32 23 - 28 18 - 23 12 - 18 7 - 12 <7 mmol/l Clarke degrees > 29 27 - 29 25 - 27 23 - 25 20 - 23 17 - 20 13 - 17 9 - 13 5-9 <5 Electronic adjustment 10 9 8 7 6 51) 4 3 2 12) > 4. 2 3. 9 - 4. 2 3. 5 - 3. 9 3. 2 - 3. 5 2. 8 - 3. 2 2. 3 - 2. 8 1. 8 - 2. 3 1. 2 - 1. 8 0. 7 - 1. 2 < 0. 7 6. 2 Electronic adjustment 1. Press the on/off button to activate the appliance. Press and hold Program until the prostarts to gramme indicator flash and the programme indicator comes on with fixed light. Wait until the programme indicator goes off and the end indicator starts to flash. Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). If you use detergent tablets, put the tablet in the compartment (A). Make sure that the release button locks into position. 7. 2 Using the combi detergent tablets When you use tablets, that contain salt and rinse aid, do not fill the salt container and the rinse aid dispenser. Adjust the water softener to the lowest level. Set the rinse aid dispenser to the lowest position. 7. 3 Setting and starting a programme Reset function For some settings it is necessary that the appliance is in user mode. The appliance is in user mode when all the programme indicators are on and the end indicator is flashing. To set the appliance in user mode, do the Reset function. Press and hold Program until all the programme indicators come on and the end indicator flashes. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Press the on/off button to activate the appliance. Set the water softener to the highest level. [. . . ] If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. [. . . ]