User manual AEG-ELECTROLUX ZA1

[. . . ] English Table of Contents 2­3 4­5 6­7 8­9 10 11 12 12 12 13 14­15 14­15 16 17 18­19 20­21 22­23 24­25 26 27 28 28 28 29 30­31 30­31 32 33 Time to Enjoy Life Functional Description For Your Own Safety Preparations Before Use Buttons and Display Vacuuming Programmes Timer Changing the Message Display Language Status Messages Questions and Answers Emptying and Cleaning the Dust Collector Cleaning the Roller Accessories/After-Sales Service Technical Specifications 34­35 36­37 38­39 40­41 42 43 44 44 44 45 46­47 46­47 48 49 1 Let me take the strain out of cleaning. My built-in, advanced sensors scan the room when I vacuum. I charge myself and switch off when the job is done. Just leave me to do the job. Time to enjoy life Let me vacuum the kitchen when you are surfing the net in the other room. [. . . ] Set the desired time setting by pressing and then confirm with . (When "On" is chosed, use to set desired time, confirm by pressing . This is the vacuuming time after wall mapping. ) 5. Press to commence vacuuming. The Quick programme is identical with Normal vacuuming except that wall mapping is not included. Vacuuming takes shorter time with the duration preset to 10 minutes, however, the vacuum result may be slightly inferior. 1. After you have switched on Trilobite, press until "Select program?" is shown. Use until "Quick" is displayed and confirm by pressing . If you don't want to change the time setting, press twice and start vacuuming by pressing . If you would like to change the time setting, please follow the next steps instead of step 3. Confirm the option "Select timer?" by pressing . Set the desired time setting by pressing and then confirm with . (When "On" is chosed, use to set desired time, confirm by pressing . ) 6. Press to commence vacuuming. Use Spot vacuuming to quickly vacuum a limited area, e. g. if you have spilled something. The area to be vacuumed is approx. 1 m2 with Trilobite placed in the centre of the area. The area is vacuumed twice. 1. After you have switched on Trilobite, press until "Select program?" is shown. Use until "Spot" is displayed and confirm by pressing . Put Trilobite in the centre of the area to be vacuumed and start vacuuming by pressing . Do not under any circumstances vacuum liquids or lit or glowing objects, e. g. Never start vacuuming at distances under 0. 5 m from a magnetic strip. Vacuuming can always be interrupted by pressing . After this, pressing recommences vacuuming, while pressing will call up the menu. NOTE!Never start vacuuming at distances under 0. 5 m from a magnetic strip. Vacuuming can always be interrupted by pressing . [. . . ] Replace the lid, and push down on the lid. If the lid cannot be properly closed, the dust collector is most likely set incorrectly. 6. Use a pair of scissors to cut away strings, threads, etc. Do not wash the roller in water or other liquids. 7. [. . . ]