User manual AEG-ELECTROLUX ZAC6737

[. . . ] The vacuum cleaner features double insulation and does not need to be earthed. Disconnect the plug from the mains before cleaning or maintenance of the vacuum cleaner. Be sure to keep the vacuum cleaner in a dry place. All servicing and repairs must be carried out by an authorised Electrolux service centre. [. . . ] Damage to the machine's cable is not covered by the warranty. * Certain models only. 19 ELX10223_Accelerator_Asian. indd 19 2007-01-23 15:27:20 Hepa ( 33) 15 () 16 * * () 17 18 19a 19b* 20 ( 20a) ( 20b) 11 12 13* 14* Hepa 33 15 16 ** ** 17 18 19a 19b* 20 (20a) (20b) 11 12 13* 14* 11 12 13 14 15 16 17 18 19b 19a * * 20a 20b 20 ELX10223_Accelerator_Asian. indd 20 2007-01-23 15:27:20 English Before starting Push the release buttons at the front of the vacuum cleaner and fold up the front lid. 12 Lift the dust container out and check that the motor filter is in place. 13* Open the lid at the back of the machine and check that the exhaust filter is in place. 14* Remove the upper cover of the dust container by releasing the filter button. Remove the pre-filter by pulling it upwards and check that the cylindrical Hepa filter is in place (see 33). Put the pre-filter and upper cover back and place the dust container back into the cleaner. 15 Insert the hose until the catches click to engage (press the catches to release the hose). 16 Attach the extension tubes* or telescopic tube* to the hose handle and nozzle by pushing and twisting together. (Twist and pull apart to dismantle. ) 17 Extend the electric cable and connect it to the mains. The vacuum cleaner is fitted with a cable winder. Once the electric cable has been extended, it stays in that position. Let it dry before placing it back into the cleaner. 35 Remove particles that have got stuck in the dust container and rinse it in water. Ensure it is dry before placing it back into the cleaner. Make sure that the tabs on the dust container lid are located securely into the holes on the base. 36 Put the pre-filter and upper cover back and place the dust container back into the cleaner. Cleaning/replacing filters Remove the motor filter by pulling it upwards (37). Rinse it in water and let dry before placing it back into cleaner. There are four types of exhaust filters: · Foam filter placed in the filter lid · Micro filter* (Ref. EF 17) · Hepa H12* non-washable (Ref. EF H12) · Hepa H12* washable (can be bought as an option, Ref. EF H12W) The exhaust filters must always be replaced with new ones and cannot be washed except Hepa H12* washable and foam filter. The Hepa H12* washable and foam filter can be cleaned by rinsing them under water. [. . . ] Remove dust-balls, hair or other entangled objects. 43* Larger objects can be accessed by removing the connection tube from the nozzle. 41 Cleaning the turbo nozzle* 44 Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads, etc. Use the hose handle to clean the nozzle. [. . . ]