User manual AEG-ELECTROLUX ZAM6105BB

[. . . ] If necessary an extension cable suitable for 10 A can be used. € If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard. € • • • • • • • • • Always place the appliance on a flat, level surface. The appliance must be switched off and the mains plug withdrawn before cleaning and maintenance. [. . . ] Do not immerse the appliance in water or any other liquid. When processing heavy load, do not use the appliance continuously for more than 40 seconds. Do not let cord hang over edge of table or counter, do not let cord contact hot surface, including the stove. Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons. Only use the appliance when handle is locked, never reach into the feeding • • • • • • • • tube with your fingers of an object while the appliance is running. Do not remove the pulp container when the appliance is in operation. Make sure all parts are correctly mounted before you switch on the appliance. Make sure the motor and blade have completely stopped before disassembling and cleaning. Do not use the appliance if the rotating sieve is damaged. Please disconnect the supply power and put the switch to the off position when you open the lid. Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use. Never insert your fingers or an object into the feeding tube. After you have processed all ingredients and the juice flow has stopped, turn the knob to the position ‘0’ and wait till the filter has stopped rotating. Switch the appliance off, remove the plug from the wall socket and wait until the filter has stopped rotating. Remove the detachable parts from the motor unit. Remove the juice collector together with the filter. Clean these parts with the cleaning brush in warm water with some washing-up liquid and rinse them under the tap. Clean the motor base with a damp cloth, never immerse the motor base in water nor rinse it under the tap. Possible cause Components are not fixed properly. The speed selector is not on the right possition. The plug is not properly connected to the power outlet. Solution Check if all components are properly locked into position. [. . . ] Disconnect the power supply, stop using and contact authorized service. The appliance can still not function well after our recommended inspections. The product produces abnormal noice, smell, smoke and increased temperature. EN Disposal Packaging materials The packaging materials are environ­ mentally friendly and can be recycled. [. . . ]