Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AEG-ELECTROLUX ZB271G. We hope that this AEG-ELECTROLUX ZB271G user guide will be useful to you.
Lastmanuals help download the user guide AEG-ELECTROLUX ZB271G.
Detailed instructions for use are in the User's Guide.
[. . . ] The battery must not be dismantled, short-circuited, placed against a metal surface or exposed to strong heat. Using the vacuum cleaner in the above circumstances may cause serious damage to the product. such damage is not covered by the warranty. Never use the vacuum cleaner without its filters. [. . . ] insert the adaptor into the mains socket and connect it to the charging station. Underneath the charging station there is a hollow space where redundant cable can be wound (21a). The wall unit can also be mounted on a wall (22a). Release the wall unit from the floor unit (22b). Always ensure that the wall can bear the weight of Ergorapido. Always make sure that Ergorapido is turned off when placed in the charging station. The indicator light (24a) will come on once Ergorapido has made contact with the charging station. It takes up to 24 hours to fully charge the batteries before the first use. when fully discharged , approximately 15-20 hours' charging is required for the battery to regain full capacity. Ergorapido should be left on charge when not being used. The adaptor may become warm during charging  this is normal. Replace the brush roll and make sure that it fits into its guiding tracks, and that it can spin freely. Occasionally objects can get stuck in the bellows, and this can affect suction power. Remove the bellows by loosening the catch and then pulling the bellows from the attachment. Clean the bellows using a stick or similar object. Put the bellows back in the attachment and lock using the catch. Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavity. Remove threads or any other objects that may have become jammed in the wheel shafts. Reassemble the wheels by pressing them back into their tracks. If your Ergorapido is to be disposed of, the batteries should be removed. Used batteries should never be disposed of with household waste. They should always be taken to a recycling station. [. . . ] ⷠRun batteries flat before removing them. In cases of breakdown or faults, your Ergorapido must be taken to an authorised Electrolux service centre. If the supply cord is damaged, it must be replaced by Electrolux or its service agent or a similarily qualified person in order to avoid a hazard. Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ZB271G
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ZB271G will begin.
