User manual AEG-ELECTROLUX ZB288

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. [. . . ] This function gives better results for the hygiene. You cannot activate or deactivate the options while a programme operates. Press Option button 1 time 2 times 3 times 4 times on off on off off on on off Make sure that the set level of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Do not use detergent and do not load the baskets. if you use the combi detergent tablets , activate the multitab function. These tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area. The dishwasher salt keeps the water softener clean and in good conditions. refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. ⷠDo not put in the appliance items made of wood, horn, aluminium, pewter and copper. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use detergent tablets, put the tablet in the compartment (A). Make sure that the release button locks into position. Do not use more than the correct quantity of detergent. refer to the instructions on the detergent packaging. Detergent tablets do not fully dissolve with short programmes and detergent residues can stay on the dishes. We recommend that you use detergent tablets with long programmes. The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: · If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode. Starting a programme without delay start Press Program again and again until the indicator of the programme that you want to set comes on. [. . . ] After the checks are completed, activate the appliance. The programme was not applicable for the type of load and soil. Make sure that the filters are correctly assembled and installed. remove remaining soil with a thin pointed object. [. . . ]