User manual AEG-ELECTROLUX ZB403

[. . . ] Never use the vacuum cleaner: 11a hot or cold ashes. Using the vacuum cleaner in the above circumstances may cause serious damage to its motor. such damage is not covered by thewarranty. Never use the vacuum cleaner without its filters. [. . . ] Never use the vacuum cleaner if the cable is damaged. Damage to the machine’s cable is not covered by the warranty. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. English Unpacking and assembly Check that all parts are in the box. Always make sure that Rapido Wet & Dry is switched off when placed in the charging station. An indicator light (12a) will come on once Rapido Wet & Dry makes contact with the charging station. It takes 16-20 hours to fully charge the batteries before the first use. When Rapido Wet & Dry is totally discharged, approximately 16 hours charging is required to regain full capacity. In order to ensure that it is always ready for use, Rapido Wet & Dry should be left on charge when not being used. The adaptor may become warm during charging – this is normal. Make sure that the parts are dry before they are reassembled. English Disposal If a Rapido Wet & Dry is to be disposed of, the batteries should be removed. Used batteries should never be disposed of with household waste. These should always be taken to a recycling station. NB – Rapido Wet & Dry must not be connected to the charging station while you are removing the batteries. Unclip the connecting cables and lift out the batteries. Servicing or repairs In cases of breakdown or faults, your Rapido Wet & Dry must be taken to an authorised Electrolux service centre. If the supply cord is damaged, it must be replaced by Electrolux or its service agent or a similarily qualified person in order to avoid a hazard. Consumer information Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. [. . . ] If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. Com If you have any comments on the cleaner or the Instructions for Use booklet please e-mail us at: Please visit our website at www. [. . . ]