User manual AEG-ELECTROLUX ZCS2100FB

[. . . ] When housing shows visible signs of damage. On fine dust, for instance from plaster, concrete, flour, hot or cold ashes. All servicing and repairs must be carried out by an authorised Electrolux service centre. [. . . ] to avoid damaging the carpet , do not keep the nozzle stationary whilst the brush is rotating. Do not pass the nozzle across electric cables, and be sure to switch off the vacuum cleaner immediately after use. REPLACING THE DUST BAG, S-bag® 1 The dust bag, s-bag® must be replaced latest when the indicator window is completely red. Lift out the insert holding the s-bag®. Pull the cardboard to remove the s-bag® from the insert. this automatically seals the s-bag® and prevents dust leaking out. Insert a new s-bag® by pushing the cardboard right into the end of the groove in the insert. attach the insert by placing it on the back pegs in the bag compartment. Then fold down the insert and close the cover. Replace the s-bag® even if it is not full (it could be obstructed). also replace after vacuuming carpet-cleaning powder. Be sure to use only an original Electrolux dust bags, s-bag® Classic or s-bag® Clinic. Should be done with every 5th replacement of the dust bag, s-bag® 6 7 8 Fold down the carrying handle. press the catches , remove the hose and open the front cover. Lift out the insert holding the s-bag®. Pull the motor filter holder upwards until it comes away from the groove. [. . . ] The vacuum cleaner stops 1 C heck whether the dust bag, s-bag® is full. Electrolux declines all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. For more details of warranty and consumers' contacts see the Warranty Booklet in the packaging If you have any comments on the cleaner or the Operating Instructions manual please e-mail us at floorcare@electrolux. [. . . ]