User manual AEG-ELECTROLUX ZS101

[. . . ] On / off button Container release button Dust container Cable hook Locking screw Carpet / hard floor nozzle Extension tube Fine filter (inner filter) Pre filter ( outer filter) Shoulder strap * Parquet nozzle * Upholstery nozzle * Combination crevice nozzle / brush * Hose * 2 3 * = Certain models only. 2 GB Safety precautions This vacuum cleaner should only be used for normal vacuuming in a domestic environment. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] Fit the floor nozzle towards the vacuum cleaner. 1a 1b • • Starting to vacuum clean • 1 • • Release the cable by rotating the upper cable holder (2), and plug the cable. 1; Off 2; On Start / Stop (3b)* 1; Off 2; Medium power 3; Maximum power Floor nozzles (4) Carpet / Hard floor nozzle (4a) Carpets: Use with the lever in position (A). 6 GB Using the Extension tube : Connect the nozzle to the extension tube (5) for cleaning under beds & furniture 5 Hose & Accessories * Remove the floor nozzle and secure the shoulder strap* around the nozzle connection and the upper stick, as shown on the image (6). Fasten the hose towards the nozzle connection and connect the accessories*. Cleaning the filters and dust container Dynamica's dust container must be emptied regularly, plus dust container and filters need to be cleaned to maintain a high suction power. Clean the filters every third emptying or when Dynamica has low suction power Make sure parts are dry before reassembling. 7 Release the whole dust container by pushing the release button. 9 Empty the content into a wastepaper basket. 10 Separate filters Shake them clean or rinse separately using warm water. Make sure filters are dry before reassembling in reverse order. 11 Put the filters back and press back the dust container in reverse order. Troubleshooting The vacuum cleaner does not start • Check that the cable is connected to the mains. € Check that the plug and cable are not damaged. [. . . ] This kind of thoughtful care means innovating with insight. Not design for design’s sake, but design for the user’s sake. For us, thoughtful design means making appliances easier to use and tasks more enjoyable to perform, freeing our customers to experience that ultimate 21st century luxury, ease of mind. [. . . ]