User manual AEG-ELECTROLUX ZS85

[. . . ] Check that your supply voltage is the same as that stated on the rating plate on the charging adaptor. Use only the original charging adaptor designed for this model. €¢ Do not immerse the machine in water for cleaning. The hose shall be checked regularly and must not be used if damaged. [. . . ] €¢ On fine dust, for instance from plaster, concrete, flour, hot or cold ashes. Using the vacuum cleaner in the above circumstances may cause serious damage to its motor. Such damage is not covered by the warranty. Never use the vacuum cleaner without its filters. Electric cable precautions: 12b Regularly check that the cable is not damaged. Never use the vacuum cleaner if the cable is damaged. Damage to the machine’s cable is not covered by the warranty. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. 5 English Unpacking and assembly Check that all parts are in the box. Always make sure that Rapido is switched off when placed in the charging station. An indicator light (12a) will come on once Rapido makes contact with the charging station. Take out both filters by pushing the release springs (21). The dust container, prefilter and fine filter can be shaken clean or cleaned and rinsed using luke warm water (22b). Make sure that the parts are dry before they are reassembled. Open the vacuum cleaning cover (23a) and, using a pair of pliers, remove the shaft to release the wheels (23b). Remove any dust, hair or other objects that may be entangled and then reassamble wheels and the vacuum cleaning cover. 9 English If a Rapido is to be disposed of, the batteries should be removed. Used batteries should never be disposed of with household waste. These should always be taken to a recycling station. NB – Rapido must not be connected to the charging station while you are removing the batteries. €¢ Unclip the connecting cables and lift out the batteries. In cases of breakdown or faults, your Rapido must be taken to an authorised Electrolux service centre. [. . . ] If the supply cord is damaged, it must be replaced by Electrolux or its service agents or a similarily qualified person in order to avoid a hazard. Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. This product is designed with the environment in mind. [. . . ]