User manual AEG-ELECTROLUX ZT 3520

[. . . ] Fluids (this can cause serious damage to the machine). The above can cause serious damage to the motor ­ damage which is not covered by the warranty. electrical cable precautions: · If the supply cord is damaged, it must be replaced by the manufacturer, it's service agent or similary qualified person in order to avoid a hazard. [. . . ] Lift the top plastic cover from its position and pull the filter from its position. To clean the filter rinse under cold water and be sure to air dry for at least 24 hours before placing it back in the vacuum cleaner. the motor filter is placed in a plastic frame. Both the filter and the frame can be rinsed. Be sure to dry them before placing back. Press down on the filter cover, release the latch and lift it from the vacuum cleaner. Tap the hepa filter face down on a flat surface covered with a sheet of paper. This will help dislodge excessive residue from the filter. If necessary the hepa filter can be washed under a tap with cold water. Always wash the filter from the underside. Air dry the hepa filter for 24 hours to ensure it is completely dry before re-using it. Replace the hepa filter cover by inserting the bottom 2 tabs first, and then push the filter cover down until it clicks into place. The vacuum cleaner stops automatically if the nozzle, tube, hose or filters become blocked and when the dust container is full. In such cases, disconnect from mains and allow to cool for 20-30 minutes. Clear blockage and/or replace filters, empty the dust container and restart. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. [. . . ] Com Do you remember the last time you opened a gift that made you say "Oh!" That's the kind of feeling that the designers at Electrolux seek to evoke in everyone who chooses or uses one of our products. We devote time, knowledge, and a great deal of thought to anticipating and creating the kind of appliances that our customers really need and want. [. . . ]