User manual AEG CS FMP 200

[. . . ] ISO- Stecker Block B Kontakt B1 B2 B3 B4 B5 B6 B7 B8 Funktion Englischer Kabelaufdruck Lautsprecher rechts hinten + Speaker right rear + Lautsprecher rechts hinten Lautsprecher rechts vorne Lautsprecher rechts vorne Lautsprecher links vorne Lautsprecher links vorne Lautsprecher links hinten Lautsprecher links hinten - Speaker right rear + Speaker right front + - Speaker right front + Speaker left front + - Speaker left front + Speaker left rear + - Speaker left rear - ISO- Stecker Block C Kontakt C1 C2 C3 Funktion Englischer Kabelaufdruck Vorverstärkerausgang links Line out left Vorverstärkerausgang Masse Line out ground Vorverstärkerausgang rechts Line out right Installation-----------------------------------Take out screw before installation--DIN Front-Mount (Method A)----------Installing the unit--------------------------Removing the unit-------------------------DIN Rear-Mount (Method B)-----------Using the detachable Front panel---Wiring Conection--------------------------Operation-------------------------------------Switching ON / OF the unit------------Faceplate release-------------------------Sound adjustment-------------------------Loudnes---------------------------------------Display----------------------------------------Equalization---------------------------------Liquid crystal display--------------------Reset function------------------------------Radio operation----------------------------Switching to radio mode----------------Selecting the frequency band---------Selecting station---------------------------Local / distand------------------------------Automatic memory storing & program scanning--------------------------Station storing-------------------------------RDS operation-------------------------------CD operation---------------------------------Switching to CD mode--------------------Selecting tracks-----------------------------3 3 3 3 4 5 6 7 8 9 9 9 10 10 10 10 11 11 11 11 11 11 11 11 11 13 13 13 Pausing playing-----------------------------Previewing all track------------------------Repeating the same track----------------Playing all track in random ---------------Ejecting a disc-------------------------------MP3 operation-------------------------------Switch to CD (MP3) mode----------------Ejecting a disc --------------------------------Selecting tracks in single step----------Selecting directory up / down-----------Pausing playing----------------------------Previewing all track------------------------Repeating the same track----------------Playing all tracks in random-------------Selecting tracks by AMS / MP3 button Display information-------------------------Disc notes--------------------------------------Specification-----------------------------------Trouble shooting------------------------------Warranty-----------------------------------------EC Type-Approval certificate-------------Service address and hotline--------------Retraction of old devices------------------13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 15 15 17 18 19 19 20 20 Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. [. . . ] RADIO OPERATION SWITCHING TO RADIO MODE Press MOD button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band an frequency. Search is finished, And then 6 strongest stations are stored into the corresponding preset number button. - Program scanning Press AMS button (18) shortly to scan preset station, When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again. STATION STORING Press any one of the preset buttons (14) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button. When the unit was in CD (MP3), it will switch temporarily to radio mode. Temporary switch over to an EON linked station when EON detects a traffic announcement on that other program. if the volume level was under the threshold point it will be raised to the threshold point. But the user changed the volume level, which was more than the threshold point (min. tA volume level) , it will be set to the last level. When TA mode is on, TA of individual segment is turned on. When a TP station is received, TP of individual segment is turned on. The purpose of this key is to reduce unwanted EON TA switching, which EON TA information was received from current station and the radio switched to that EON linked station, but no information could not be received because the EON linked station is located too far from that area. so the radio is switched back to current station again. In above operation, a customer listens to a wrong program or mute sound for a while. EON TA LOCAL mode When the filed strength level of EON linked is less than threshold level, the radio does not switch that station, and a customer can hardly listen to any disturbances. When EON TA LOCAL mode is selected, "EON TA LO" on numeric display is indicated for a few seconds. When EON TA DISTANCE mode is selected, "EON TA DX" on numeric display is indicated for a few seconds. the RDS data used are the PI , PS , AF , TP , TA , EON and PTY data. PI: Program Identification code Code for identifying programs PS: Program Service Name Broadcast station name data expressed in alphanumerically characters AF: Alternative Frequencies Frequency list of broadcasting stations transmitting the same program TP: Traffic Program Identification Identification data for traffic information-broadcasting station TA: Traffic Announcement Identification Identification data showing traffic information is being transmitted or not EON: Enhanced Other Networks Information Broadcasting information on PI, AF, TP, TA, etc, relating to networks other than the network used for current reception PTY: Program Type Code Contents of programs such as news, light music, sports etc. CD OPERATION SWITCHING TO CD MODE If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance, . the CD is drawn into the driver automatically , CD playback begins. [. . . ] Cool off or until the ambient temperature returns to normal. Leave the player off for an hour or so, then try again. Clean the compact disc, or try to play a new one. Front panel is not properly fix into its place. [. . . ]