User manual AEG CS FMP 400

[. . . ] English Pop M, Rock M Easy M, Light M Classic M, other M. Installation Take out screw before installation DIN Front-Mount (Method A) Installing the unit Removing the unit DIN Rear-Mount (Method B) Using The detachable Front Panel Wiring Connection Operation Location of keys Switching on/off the unit Faceplate release Sound adjustment Loudness Display Equalization Vacuum fluorescent display Flashing LED Remote sensor Reset function Radio operation Switching to radio mode Selecting the frequency band Selecting station Automatic memory storing & program scanning Station storing 3 3 3 3 4 5 6 7 8 8 9 9 9 10 10 10 11 11 11 11 11 11 11 11 11 11 13 Pausing playing 13 Previewing all track 14 Repeating the same tracks 14 playing all track in random Ejecting a disc 14 14 MP3 operation 14 Switch to CD (MP3) mode 14 Ejecting a disc Selecting tracks in single step 14 14 Selecting directory up/down 14 Pausing playing 14 Previewing all tracks Repeating the same track 14 Playing all tracks in random 14 Selecting tracks by 14 AMS/MP3 button 15 Display information 16 Disc notes 17 Specification Trouble shooting 18 Warranty----------------------------------------------------19 CE Type-Approval Certifikate----------------------19 Service Address----------------------------------------20 Retraction of old devices--------------------------20 Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. [. . . ] RESET FUNCTION RESET button (25) must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. Note: if press RESET button (25), the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the front panel. RADIO OPERATION SWITCHING TO RADIO MODE Press MD button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band an frequency. Press for several seconds until "MANUAL" appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and "AUTO" appears on the display. AUTOMATIC MEMORY STORING & PROGRAM SCANNING - Automatic memory storing Press AS/PS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button. - Program scanning Press AS/PS button (18) shortly to scan preset station, When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again. STATION STORING Press any one of the preset buttons (14) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button. RDS (RADIO DATA SYSTEM) OPERATION - Setting RDS mode Press AF button (3) and release immediately to switch on or off RDS mode. AF starts blinking if the broadcasting signal getting worse. ALARM will be displayed when an emergency broadcasting is received, meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum. - Regional Program Operation Press AF button (3) for several seconds to switch on or off region mode. Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a certain time period. When region is on, the current listening program remains unchanged. When region is off, it allows the reception moves to the regional station. EON TA LOCAL mode When the filed strength level of EON linked is less than threshold level, the radio does not switch that station, and a customer can hardly listen to any disturbances. When EON TA LOCAL mode is selected, "EON TA LO" on numeric display is indicated for a few seconds. eON TA DISTANCE mode EON TA switch is tried to implemented by the information of current station. When EON TA DISTANCE mode is selected, "EON TA DX" on numeric display is indicated for a few seconds. [. . . ] Cool off or until the ambient temperature returns to normal. Leave the player off for an hour or so, then try again. Clean the compact disc, or try to play a new one. Front panel is not properly fix into its place. [. . . ]