User manual AEG FL 14

[. . . ] Should components need to be replaced which have not been described, please contact one of our service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. [. . . ] SYMBOLS Please read the instructions carefully before starting the machine. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. The dust produced when using this tool may be harmful to health (e. When working oak or beech wood, stones, paint, which could contain lead or other harmful chemicals). Use a dust absorption system and wear a suitable dust protection mask. Do not use machines on any material containing asbestos. This machine is suitable only for dry sanding. The following work can be carried out with it: Coarse sanding and grinding, Fine sanding and polishing, Rubbing down weather-beaten paint, Polishing up scratches on acrylic glass, Etc. To provide the best adhesion, it is recommended that you clean the backing pad and the sanding disc backing occasionally by brushing them lightly with a small brush. Do not use this product in any other way as stated for normal use. MAINS CONNECTION Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. [. . . ] Do not use this product in any other way as stated for normal use. MAINS CONNECTION Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. [. . . ]