User manual AEG GS 500 E

[. . . ] The noise level when working can exceed 85 dB (A). Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] Perform a test run for at least 30 seconds without load. Do not use damaged, out of round or vibrating grinding tools. When grinding metal, flying sparks are produced. Take care that no persons are endangered. Because of the danger of fire, no combustible materials should be located in the vicinity (spark flight zone). Due care should be taken that no sparks or sanding dust flying from the workpiece come into contact with you. The adjusting nut must be tightened before starting to work with the machine. Under the effect of extreme electromagnetic interferences from the outside, temporary variations in the speed of rotation could arise in particular cases. Always use and store the grinding disks according to the manufacturer`s instructions. The workpiece must be fixed if it is not heavy enough to be steady. Never lead the workpiece to the grinding disk with your hand. Make sure that the grinding tool is installed in accordance with the manufacturer`s instructions. The size of the grinding tool must be suitable for the grinder. For dusty operations, the machine`s ventilation slits must be kept clear. If necessary, switch off the power to the machine and remove the dust. Use a non-metallic object for this, taking care not to damage any of the inner parts. [. . . ] Always wear goggles when using the machine. Always disconnect the plug from the socket before carrying out any work on the machine. Do not dispose of electric tools together with household waste material! [. . . ]