User manual AEG HS 70

[. . . ] J Sawdust and splinters must not be removed while the machine is running. J Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorised Service Agents. J Only use splash proof extension cables approved for outdoor purposes. [. . . ] Different cutting lengths can be applied. In the interest of continuous improvement of our products, technical specifications are subject to alteration without prior notice. Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. When fitting the plug, make sure that the brown (live) wire of this appliance is connected to the plug terminal marked L or coloured red, and the blue (neutral) wire of this appliance is connected to the plug terminal marked N or coloured black. Under no circumstances must the wires of this appliance be connected to the earth terminal of the plug marked either E, with the earth symbol or coloured green or green/yellow. Connect the plug of the machine with the extension cable and secure the connection against unintended interruption with the cable tension release in the handle. the cable on the machine is short on purpose. Should you ever cut through the cable, it will be the extension, which can easily be replaced or repaired. The sequence of switching is unimportant as the machine only starts when both switches are activated. Out of safety reasons, there is no locking button in the switches. switching off: Release either switch handle or switch. Due to the quick stop, the machine will stop within 0. 03 seconds after the release of either switch. Before using the tool please read the instructions. if possible have the tool demonstrated. Always keep a safe footing and hold machine with both hands. Keep children or animals away from working area. Keep a safe distance between the blades and your body. To avoid damage to the extension cable always start work near the power supply and work away from socket, trailing the cable behind you. When working near the ground avoid earth or stones getting caught between the blades. Thick branches should be cut back with garden pliers With some training it is possible to remove cut-off branches frome the hedges by exercising a pendulum cutting action. Shapes of hedges A hedge can be cut in any shape, your personal taste is your limit. [. . . ] Do not use your machine late at night or on Sundays. Do not throw the cut-offs into your domestic refuse. shred the cuttings and use them for compost. Postpone cutting your hedge if birds are nesting in it. [. . . ]