User manual AEG IKE64473IB

[. . . ] Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. visit our website to: Get usage advice, brochures, trouble shooter, service and repair information: www. [. . . ] The hob is set to its highest possible power level by default. Press / of the timer to set the power level. Make sure that the selected power fits the house installation fuses. If multiple zones are active and the consumed power exceeds the limitation of the power supply, this function divides the available power between all cooking zones. The hob controls heat settings to protect the fuses of the house installation. Cooking zones are grouped according to The location and number of the phases in the hob. each phase has a maximum electricity loading (3700 W). If the hob reaches the limit of maximum available power within one phase, the power of the cooking zones will be automatically reduced. The heat setting of the cooking zone selected last is always prioritised. The remaining power will be divided between the previously activated cooking zones in reverse order of selection. The heat setting display of the reduced zones changes between the initially selected heat setting and the reduced heat setting. Wait until the display stops flashing or reduce the heat setting of the cooking zone selected last. The cooking zones will continue operating with the reduced heat setting. Change the heat settings of the cooking zones manually, if necessary. Power management with Power limitation When you set the Power limitation function to 6000 W or less, the power of the hob is divided among all cooking zones. Refer to the illustration for possible combinations in which power can be distributed among the cooking zones. When you set the Power limitation function to more than 6000 W, the power of the hob is divided between its left and right side. It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. [. . . ] If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre. Disconnect the hob from the electrical supply. [. . . ]