User manual AEG IKS64453IB

[. . . ] Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. visit our website to: Get usage advice, brochures, trouble shooter, service and repair information: www. [. . . ] OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid- ual heat. Incorrect or too small cookware or no cookware on the cooking zone. 4 OptiHeat Control (3 step Residual heat indicator) wARNING!/ / As long as the indicator is on, there is a risk of burns from residual heat. The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. The indicators / / appear when a cooking zone is hot. They show the level of The residual heat for the cooking zones you are currently using. The indicator may also appear: · for the neighbouring cooking zones even If you are not using them, · When hot cookware is placed on cold cooking zone , · When the hob is deactivated but the cooking zone is still hot. The indicator disappears when the cooking zone has cooled down. Touch for 1 second to activate or deactivate the hob. After this time the induction cooking zone automatically sets back to the highest heat setting. refer to "Technical data" chapter. To activate the function for a cooking zone: touch . To deactivate the function: change the heat setting. Count Down Timer You can use this function to set the length of a single cooking session. First set the heat setting for the cooking zone, then set the function. To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears. To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash, the time counts down. To see the remaining time: touch to set the cooking zone. The indicator of the cooking zone starts to flash. [. . . ] If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre. Disconnect the hob from the electrical supply. [. . . ]